Terex TH636C
Series: Terex Telescopic Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine make | John Deerecorrect |
|---|---|
| Engine model | 4045Tcorrect |
| Power | 100.4 hp (73.8 kW)correct |
| Rated speed | 2,500 rpmcorrect |
| Cylinders | 4correct |
Dimensions and weights
| Length | 6,830.6correct |
|---|---|
| Width | 2,590.8correct |
| Wheelbase | 3,151.6correct |
| Ground clearance | 432.8correct |
| Unladen weight | 9,562 kgcorrect |
Drivetrain and chassis
| Forward gears | 3correct |
|---|---|
| Tyre size | 1300 x 24-12 plycorrect |
Working data
| Hydraulic oil capacity | 128.7 lcorrect |
|---|---|
| Fuel tank capacity | 113.6 lcorrect |
Where this model stands
Power-to-weight ratio: 7.7 kW/t (74 kW / 9.6 t)
Stronger than 31% of the telehandlers in the register — out of 658 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Terex TH636C have?
The Terex TH636C delivers 100 hp.
How much does the Terex TH636C weigh?
The unladen weight is 9,562 kg.
What engine does the Terex TH636C have?
4 cylinders.
What are the dimensions of the Terex TH636C?
6,831 mm × 2,591 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Telehandler in 3D section
Turn the model, look inside and click an assembly — each one is explained.