Terex TC75

Series: Terex Midi Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Terex TC75 belongs to the Terex Midi Excavator series. The engine delivers 54.4 kW, has 4 cylinders, with a displacement of 3,195.5 cm³. Rated speed is 2,000 rpm. The unladen weight is 7,750.1 kg. Ground clearance is 408.4 mm. The tank holds 130.2 litres. The pump delivers 156.3 l/min. The hydraulic tank holds 140.1 litres. Working pressure is 279.9 bar. The electrical system runs on 12 V. The engine fitted is the KHD BF 4 M. The Terex Midi Excavator series covers 6 models. Rated output within it ranges from 29.4 to 54.4 kW; the TC75 sits at the top of that range with 54.4 kW. Its immediate neighbours are the HR32 below it with 53.7 kW. 377 Terex models across 29 series are on record. The model is listed under Excavators & compaction. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine modelKHD BF 4 Mcorrect
Power54.4 kWcorrect
Rated speed2,000 rpmcorrect
Cylinders4correct
Displacement3,195.5 cm³correct
Aspirationturbochargedcorrect

Dimensions and weights

Ground clearance408.4correct
Unladen weight7,750.1 kgcorrect

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Pump flow156.3 l/mincorrect
Hydraulic oil capacity140.1 lcorrect
Hydraulic pressure279.9 barcorrect
Fuel tank capacity130.2 lcorrect

Other data

Height2,700.5correct

Where this model stands

Power-to-weight ratio: 7 kW/t (54 kW / 7.8 t)

Stronger than 16% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Terex TC75 have?

The Terex TC75 delivers 54.4 kW.

How much does the Terex TC75 weigh?

The unladen weight is 7,750 kg.

What engine does the Terex TC75 have?

4 cylinders, 3,196 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare