Start › Excavators & compaction › Terex › TC60

Terex TC60

Series: Terex Midi Excavator

Source: https://www.technikboerse.com/marke/terex-1163

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TC60 from Terex is part of the Terex Midi Excavator series. The engine delivers 38.4 kW, has 4 cylinders, with a displacement of 2,507.2 cm³. Rated speed is 2,400 rpm. The unladen weight is 5,960.2 kg. Ground clearance is 362.7 mm. The tank holds 95 litres. The pump delivers 176.4 l/min. The hydraulic tank holds 108.3 litres. Working pressure is 245 bar. The electrical system runs on 12 V. The Terex Midi Excavator series covers 6 models. Rated output within it ranges from 29.4 to 54.4 kW; the TC60 sits in the lower part of that range with 38.4 kW. Its immediate neighbours are the TC48 below it with 35 kW and the HR32 above it with 53.7 kW. 377 Terex models across 29 series are on record. The model is listed under Excavators & compaction. 12 verified figures from 1 source are on file.

Technical data

Engine

Power38.4 kWcorrect
Rated speed2,400 rpmcorrect
Cylinders4correct
Displacement2,507.2 cm³correct

Dimensions and weights

Ground clearance362.7correct
Unladen weight5,960.2 kgcorrect

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Pump flow176.4 l/mincorrect
Hydraulic oil capacity108.3 lcorrect
Hydraulic pressure245 barcorrect
Fuel tank capacity95 lcorrect

Other data

Height2,700.5correct

Where this model stands

Power-to-weight ratio: 6.4 kW/t (38 kW / 6 t)

Stronger than 7% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Terex TC60 have?

The Terex TC60 delivers 38.4 kW.

How much does the Terex TC60 weigh?

The unladen weight is 5,960 kg.

What engine does the Terex TC60 have?

4 cylinders, 2,507 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

HR18

HR32

TC48

TC50

TC75

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare