Technical register for agricultural, construction and commercial machinery · sourced data
StartTrucks over 7.5 tTerex › Explorer 5800

Terex Explorer 5800

Built: 2016-2017 · Series: Other models

More machines from model year 2016

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Explorer 5800 comes from Terex. Production: 2016-2017. The engine delivers 405 kW, has 6 cylinders, with a displacement of 12,742 cm³. The unladen weight is 59,750 kg. The wheelbase measures 8,240 mm. The gross vehicle weight is 60,000 kg. The machine runs on 10 wheels. Rated output across the Terex range ranges from 13.4 to 3,355.7 kW; the Explorer 5800 sits at the bottom of that range with 405 kW. Its immediate neighbours are the TC550 below it with 391.5 kW and the AC200 above it with 410.1 kW. 377 Terex models across 29 series are on record. The model is listed under Trucks over 7.5 t. 12 verified figures from 1 source are on file.

Terex – other mobile cranes and haulers with truck registration: AC and Demag-series cranes plus dump trucks, 315 to 480 kW, operating weights from 35.75 to 104.1 tonnes

This page gathers Terex machines registered as trucks over 7.5 tonnes, even though they are mobile cranes and haulers – visible in the model designations AC 220-5, AC 500-2 and Demag AC 80-2 for the cranes and FD3000 to FDC500SGL for the haulers. Terex traces back to an earthmoving business founded in 1933 that later belonged to General Motors' Euclid division before becoming an independent US-based construction-equipment group; in 2002 Terex took over Demag's mobile-crane division, building one of the industry's largest crane ranges. The AC range denotes all-terrain cranes, the number the approximate lifting capacity in tonnes, the suffix -2 or -5 the model generation.

Read on 3 more paragraphs

The register lists here 64 versions with 315 to 480 kW from six- and eight-cylinder diesel engines of 7,201 to 16,000 cm³, operating weights from 35,750 to 104,100 kg, lengths from 11,490 to 19,295 mm and widths from 2,550 to 3,100 mm.

Mobile cranes of this class work in industrial and plant construction and wind-turbine erection, where their road registration as trucks allows travel between sites without a special transport permit; the FD-series haulers serve earthmoving and material transport in civil works and open-cast mining, where their high payload counts alongside comparatively compact dimensions.

On a used crane, the condition of the telescopic boom and hydraulic cylinders and the history of boom torsion count; on all vehicles, operating hours and the condition of axles and brakes given the high operating weight, and on the diesel engines the turbocharger and injection system; service and parts run through the Terex and Demag service network.

Sources: Kennwerte der Modelle Terex (weitere Modelle), Terex (Hersteller)

Technical data

Engine

Power405 kWcorrect
Cylinders6correct
Displacement12,742 cm³correct

Dimensions and weights

Wheelbase8,240 mmcorrect
Unladen weight59,750 kgcorrect
Gross vehicle weight60,000 kgcorrect

Drivetrain and chassis

Wheels10correct

Where this model stands

Power-to-weight ratio: 6.8 kW/t (405 kW / 59.8 t)

Stronger than 91% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Terex Explorer 5800 have?

The Terex Explorer 5800 delivers 405 kW.

How much does the Terex Explorer 5800 weigh?

The unladen weight is 59,750 kg.

What is the gross vehicle weight of the Terex Explorer 5800?

60,000 kg.

What engine does the Terex Explorer 5800 have?

6 cylinders, 12,742 cm³ displacement.

When was the Terex Explorer 5800 built?

Production years: 2016-2017.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare