TCM FHG36T3
Series: TCM Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | K25correct |
|---|---|
| Fuel | Gas and LPcorrect |
| Displacement | 2,487.6 cm³correct |
Dimensions and weights
| Width | 1,332correct |
|---|---|
| Unladen weight | 5,452.2 kgcorrect |
Drivetrain and chassis
| Tyre type | pneumatic tyrescorrect |
|---|---|
| Top speed | 24.1 km/hcorrect |
| Turning radius | 2,600 mmcorrect |
Working data
| Lifting capacity | 3,629 kgcorrect |
|---|---|
| Lift height | 3,300 mmcorrect |
Other data
| Lift speed | 25.2 m/mincorrect |
|---|---|
| Load centre | 609.6 mmcorrect |
More machines with this engine (Nissan K25, 26)
Frequently asked questions
How much does the TCM FHG36T3 weigh?
The unladen weight is 5,452 kg.
What engine does the TCM FHG36T3 have?
2,488 cm³ displacement, Gas and LP.
How fast does the TCM FHG36T3 go?
Top speed is 24.1 km/h.
What is the load capacity of the TCM FHG36T3?
Load capacity is 3,629 kg at a 610 mm load centre, lift height 3,300 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.