Start › Excavators & compaction › Sunward › SWE330LC

Sunward SWE330LC

Series: Sunward Hydraulic Excavator

Source: https://www.kleinanzeigen.de/s-anzeige/minibagger-sunward-sw

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Sunward Hydraulic Excavator series from Sunward includes the SWE330LC. The engine delivers 184 kW, with a displacement of 7,790.4 cm³. Torque is 872.9 Nm. The unladen weight is 33,200 kg. Ground clearance is 512.1 mm. The tank holds 605.3 litres. The pump delivers 536 l/min. The hydraulic tank holds 290.3 litres. Working pressure is 324 bar. The engine fitted is the AA-6HK1XQP. Rated output across the Sunward range ranges from 40 to 184 kW; the SWE330LC sits at the top of that range with 184 kW. Its immediate neighbours are the SWE225LC below it with 125.1 kW. 8 Sunward models across 5 series are on record. The model is listed under Excavators & compaction. 12 verified figures from 1 source are on file.

Technical data

Engine

Engine model	AA-6HK1XQPcorrect
Power	184 kWcorrect
Torque	872.9correct
Displacement	7,790.4 cm³correct
Aspiration	turbochargedcorrect

Dimensions and weights

Ground clearance	512.1correct
Unladen weight	33,200 kgcorrect

Working data

Pump flow	536 l/mincorrect
Hydraulic oil capacity	290.3 lcorrect
Hydraulic pressure	324 barcorrect
Fuel tank capacity	605.3 lcorrect

Other data

Cab height	3,130.3correct

Where this model stands

Power-to-weight ratio: 5.5 kW/t (184 kW / 33.2 t)

Stronger than 77% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Sunward SWE330LC have?

The Sunward SWE330LC delivers 184 kW.

How much does the Sunward SWE330LC weigh?

The unladen weight is 33,200 kg.

What engine does the Sunward SWE330LC have?

7,790 cm³ displacement.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →