Start › Excavators & compaction › Sunward › SWE225LC

Sunward SWE225LC

Series: Sunward Hydraulic Excavator

Source: https://www.lectura-specs.fr/fr/modele/machines-de-chantier/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SWE225LC from Sunward is part of the Sunward Hydraulic Excavator series. The engine delivers 125.1 kW, with a displacement of 6,494.2 cm³. Torque is 697 Nm. The unladen weight is 22,600 kg. Ground clearance is 472.4 mm. The tank holds 370.2 litres. The pump delivers 440.2 l/min. The hydraulic tank holds 250.2 litres. Working pressure is 324 bar. The engine fitted is the 6BG1TC. Rated output across the Sunward range ranges from 40 to 184 kW; the SWE225LC sits in the middle of that range with 125.1 kW. Its immediate neighbours are the SWTH3514 below it with 74.6 kW and the SWE330LC above it with 184 kW. 8 Sunward models across 5 series are on record. The model is listed under Excavators & compaction. 12 verified figures from 1 source are on file.

Technical data

Engine

Engine model	6BG1TCcorrect
Power	125.1 kWcorrect
Torque	697correct
Displacement	6,494.2 cm³correct
Aspiration	turbochargedcorrect

Dimensions and weights

Ground clearance	472.4correct
Unladen weight	22,600 kgcorrect

Working data

Pump flow	440.2 l/mincorrect
Hydraulic oil capacity	250.2 lcorrect
Hydraulic pressure	324 barcorrect
Fuel tank capacity	370.2 lcorrect

Other data

Height	2,965.7correct

Where this model stands

Power-to-weight ratio: 5.5 kW/t (125 kW / 22.6 t)

Stronger than 60% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Sunward SWE225LC have?

The Sunward SWE225LC delivers 125 kW.

How much does the Sunward SWE225LC weigh?

The unladen weight is 22,600 kg.

What engine does the Sunward SWE225LC have?

6,494 cm³ displacement.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →