Stetter MSE7009
Built: 2005 · Series: Other models
More machines from model year 2005
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Stetter MSE7009 (2005): a towed concrete-mixer trailer with a gross weight of 20,000 kg, an unladen weight of 8,000 kg and a payload of 12,000 kg in EU class O4.
The MSE7009 trailer from Stetter was registered in 2005. Stetter is a well-known name in concrete-mixing technology, both for truck-mounted mixers and for towed mixer trailers; the MSE model designation points in that direction.
Read on 3 more paragraphs
At a gross weight of 20,000 kg, an unladen weight of 8,000 kg and a payload of 12,000 kg, a length of 8.40 m and a width of 2.50 m, the ratio of unladen weight to payload fits a trailer with a rotating mixing drum well: the drum and its drive make up a substantial part of the unladen weight, independent of the actual concrete load.
At a gross weight of 20,000 kg the trailer falls into EU class O4 with air brakes. As a towed mixer it is usually moved by a separate towing vehicle and, at the site, powered through a power take-off or its own drive for the mixing drum, rather than using the carrier vehicle's engine as a truck-mounted mixer does.
Buying a used mixer trailer of this kind means checking the inside of the drum first: wear on the mixing blades and concrete residue in hard-to-reach corners reveal how carefully it was cleaned after each use. Equally important is checking the drum drive and its bearings for leaks, since these are under greater strain on a towed mixer than on a self-propelled truck mixer. The water tank and dosing pump used to control the concrete's consistency are worth checking too, since limescale and dried concrete residue there are common after years of use.
Sources: SpecCodex-Register: Kennwerte des Modells MSE7009, Stetter
Technical data
Dimensions and weights
| Length | 8,400 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Unladen weight | 8,000 kgcorrect |
| Gross vehicle weight | 20,000 kgcorrect |
Frequently asked questions
How much does the Stetter MSE7009 weigh?
The unladen weight is 8,000 kg.
What is the gross vehicle weight of the Stetter MSE7009?
20,000 kg.
What are the dimensions of the Stetter MSE7009?
8,400 mm × 2,500 mm.
When was the Stetter MSE7009 built?
Production years: 2005.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
