Steiger Panther 1000 CP1360
Built: 1982-1985 · Series: Panther
More machines from model year 1982
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine make | Caterpillarcorrect |
|---|---|
| Engine model | 360correct |
| Fuel | dieselcorrect |
| Power | 270 hpcorrect |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | four-wheel driveWDcorrect |
|---|
Origin and approval
| Plant | Fargo, North Dakota, USAcorrect |
|---|
Frequently asked questions
How much power does the Steiger Panther 1000 CP1360 have?
The Steiger Panther 1000 CP1360 delivers 270 hp.
When was the Steiger Panther 1000 CP1360 built?
Production years: 1982-1985.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
