StartTelehandlersSkyjack › SJ1044 TH

Skyjack SJ1044 TH

Series: Skyjack Telescopic Forklift

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Skyjack SJ1044 TH belongs to the Skyjack Telescopic Forklift series. The engine delivers 75 hp (55.2 kW). The engine comes from Deutz. Torque is 389.1 Nm. The unladen weight is 12,539.6 kg. Ground clearance is 484.6 mm. The engine fitted is the TCD 3,6L. Tyre size: 14 x 24 16PR Grip Lug. The Skyjack Telescopic Forklift series covers 7 models. Rated output within it ranges from 75 to 170.3 hp; the SJ1044 TH sits at the bottom of that range with 75 hp. Its immediate neighbours are the SJ1256 THS above it with 108.5 hp. 39 Skyjack models across 7 series are on record. The model is listed under Telehandlers. 11 verified figures from 1 source are on file.

Technical data

Engine

Engine makeDeutzcorrect
Engine modelTCD 3.6Lcorrect
Power75 hp (55.2 kW)correct
Torque389.1correct

Dimensions and weights

Width2,590.8correct
Height2,470 mmcorrect
Ground clearance484.6correct
Unladen weight12,539.6 kgcorrect

Drivetrain and chassis

Gearbox typeDana powershift transmissioncorrect
Tyre size14 x 24 16PR Grip Lugcorrect
Tyre typepneumatic tyrescorrect

Working data

Lift height13,500 mmcorrect

More machines with this engine (Deutz TCD 3.6L, 2)

Where this model stands

Power-to-weight ratio: 4.4 kW/t (55 kW / 12.5 t)

Stronger than 11% of the telehandlers in the register — out of 661 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Skyjack SJ1044 TH have?

The Skyjack SJ1044 TH delivers 75 hp.

How much does the Skyjack SJ1044 TH weigh?

The unladen weight is 12,540 kg.

What are the dimensions of the Skyjack SJ1044 TH?

2,591 mm × 2,470 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Telehandler in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare