Start › Military & special vehicles › Scania › Other models › Saab-Scania SBAT 111S

Scania Saab-Scania SBAT 111S

Built: 1976-1989 · Series: Other models

More machines from model year 1976

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Saab-Scania SBAT 111S comes from Scania. Production: 1976-1989. The machine is 7,780 mm long, 2,480 mm wide and 2,900 mm high. The unladen weight is 11,650 kg. Unladen weight across the Scania range ranges from 3,718 to 76,711 kg; the Saab-Scania SBAT 111S sits at the bottom of that range with 11,650 kg. Its immediate neighbours are the P 340 LB6X2*4HNA below it with 11,640 kg and the R 450 B8x4NZ above it with 11,654 kg. 11893 Scania models across 91 series are on record.

Saab-Scania SBA 111 – The Swedish Off-Road Truck Tgb 30

The SBA111 is a military 4x4 cross-country truck developed by the Scania division of Saab-Scania for the Swedish armed forces, who designated it Terrängbil 30 (Tgb 30). It was powered by an 11-litre diesel engine from the first-generation "Special Bulldog Allwheeldrive" family. Testing began in 1971, and in 1975 Scania was awarded a SEK 1.5 billion order. By the time production stopped in 1981, about 1,700 SBA111s and 800 units of the three-axle 6x6 variant SBAT111S (Terrängbil 40, Tgb 40) with a supercharged 11-litre engine had been delivered to the army, air force and navy; production resumed in 1986 following an Indian order. More than 50 years after its introduction, some vehicles remain in service. Listed in the register: the Saab-Scania SBA 111.

Sources: Wikipedia – Scania SBA111

Technical data

Engine

Engine	silnik diesel Scania DS11LB27 o mocy 300 KMcorrect

Dimensions and weights

Length	7,780 mmcorrect
Width	2,480 mmcorrect
Height	2,900 mmcorrect
Unladen weight	11,650 kgcorrect

Frequently asked questions

How much does the Scania Saab-Scania SBAT 111S weigh?

The unladen weight is 11,650 kg.

What are the dimensions of the Scania Saab-Scania SBAT 111S?

7,780 mm × 2,480 mm × 2,900 mm.

When was the Scania Saab-Scania SBAT 111S built?

Production years: 1976-1989.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikipedia (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Fire appliance in 3D section

Turn the model, look inside and click an assembly — each one is explained.