Scania RM 6X2
Built: 1990-1994 · Series: RM
More machines from model year 1990
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania RM – heavy chassis in 4x2 and 6x2 configuration, six- and eight-cylinder diesel engines from 8.5 to 14.2 litres, gross vehicle weight from 12 to 26.4 tonnes
The RM range groups heavy Scania truck chassis in 4x2 and 6x2 configuration, recorded in the register under designations from RM 4X2 to RM 6X2 ZS 65160; letter-and-digit suffixes such as AL, AS and ZL denote different axle and body variants. The vehicles on this collective page cover both lighter six-cylinder and heavier eight-cylinder engines and were used as tractor units and as flatbed and tipper chassis for long-haul and construction traffic.
Read on 3 more paragraphs
The register lists 19 versions with six- and eight-cylinder engines from 8,475 to 14,190 cm³, kerb weights from 6,320 to 15,840 kg, gross vehicle weights from 11,999 to 26,400 kg, lengths from 5,850 to 11,550 mm and widths from 2,480 to 2,600 mm.
As heavy chassis, RM models served classic long-haul work as well as construction and municipal use, with bodies ranging from a plain flatbed through tippers to crane vehicles. The engine span from 8.5 to 14.2 litres shows that both medium-heavy distribution versions and heavy long-haul versions ran under the shared range designation.
Buying one of these older Scania trucks used, what matters is frame corrosion, the condition of the clutch and manual gearbox with its splitter or range group, and the condition of the braking system, fitted with drum or disc brakes depending on the model year. Engine condition, compression and oil consumption on the six- and eight-cylinder versions and the condition of the rear axle should also be checked; wear parts are well supplied through the Scania parts network.
Sources: SpecCodex register, model data: Scania RM, Scania (manufacturer)
Technical data
Engine
| Cylinders | 8correct |
|---|---|
| Displacement | 14,190 cm³correct |
Dimensions and weights
| Length | 11,550 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 7,170 mmcorrect |
| Unladen weight | 13,620 kgcorrect |
| Gross vehicle weight | 26,400 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Scania RM 6X2 weigh?
The unladen weight is 13,620 kg.
What is the gross vehicle weight of the Scania RM 6X2?
26,400 kg.
What engine does the Scania RM 6X2 have?
8 cylinders, 14,190 cm³ displacement.
What are the dimensions of the Scania RM 6X2?
11,550 mm × 2,500 mm.
When was the Scania RM 6X2 built?
Production years: 1990-1994.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
RM 4X2
RM 4X2 (R142ML4X2L) FGST
RM 4X2 AL 65 100
RM 4X2 AL 65100
RM 4X2 AL 70100
RM 4X2 AL 70110
RM 4X2 AS 65 100
RM 4X2 ZL 5092-I
RM 4X2 ZL 65100
RM 6X2 A LKW
RM 6X2 AL 65162
RM 6X2 AL 65178
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.