Scania P270
Built: 2005-2014 · Series: P270
More machines from model year 2005
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania P270 – distribution and construction chassis with P-cab: 270 hp five- and six-cylinder of 8.9 litres, 4X2 and 6X2 axle formulas, gross weights from 18,200 to 26,500 kg
The Scania P270 carries the P-cab, the short and low forward-control cab of Scania's range programmes for distribution work, construction sites and municipal service. The number 270 gives the engine output in horsepower; the axle formulas 4X2 and 6X2 in the model designations state the number of axles and driven axles of the respective chassis, and the suffix SCAPP denotes special chassis equipment.
Read on 3 more paragraphs
The register lists 7 versions with 198 kW from five- and six-cylinder engines of 8,867 to 8,870 cc. Kerb weights range from 6,630 to 11,160 kg, gross vehicle weights from 18,200 to 26,500 kg. Lengths run from 5,790 to 9,725 mm, widths from 2,500 to 2,600 mm.
With the P-cab, the P270 covers the segment occupied by the short-cab Mercedes-Benz Actros and the P-cab Volvo FE/FM; as a chassis for tipper, concrete-mixer and municipal bodies it is widespread in construction traffic.
On a used example, checks should cover corrosion on the frame outriggers and spring brackets, the condition of the clutch and gearbox under frequent loaded pull-away, sealing of the charge-air cooler and turbocharger, and on 6X2 chassis the condition of the tag axle; spare parts are widely available through Scania's service network.
Sources: Kennwerte der Modelle Scania P270, Scania (Hersteller)
Technical data
Engine
| Power | 198 kWcorrect |
|---|---|
| Cylinders | 5correct |
| Displacement | 8,867 cm³correct |
Dimensions and weights
| Length | 9,725 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,700 mmcorrect |
| Unladen weight | 10,050 kgcorrect |
| Gross vehicle weight | 19,500 kgcorrect |
Drivetrain and chassis
| Gears | 8correct |
|---|---|
| Wheels | 6correct |
Where this model stands
Power-to-weight ratio: 19.7 kW/t (198 kW / 10.1 t)
Stronger than 30% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Scania P270 have?
The Scania P270 delivers 198 kW.
How much does the Scania P270 weigh?
The unladen weight is 10,050 kg.
What is the gross vehicle weight of the Scania P270?
19,500 kg.
What engine does the Scania P270 have?
5 cylinders, 8,867 cm³ displacement.
What are the dimensions of the Scania P270?
9,725 mm × 2,550 mm.
When was the Scania P270 built?
Production years: 2005-2014.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.