Technical register for agricultural, construction and commercial machinery · sourced data
StartTrucks over 7.5 tScania › L 50

Scania L 50

Built: 1972-1972 · Series: Trucks 3.5–12 t (Class N2)

More machines from model year 1972

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Scania L 50 is a machine built by Scania. Production: 1972. The engine delivers 88 kW, with a displacement of 5,200 cm³. The machine is 6,710 mm long and 2,370 mm wide. The unladen weight is 4,925 kg. The gross vehicle weight is 12,000 kg. The gearbox offers 8 gears. Rated output across the Scania range ranges from 69 to 566 kW; the L 50 sits at the bottom of that range with 88 kW. Its immediate neighbours are the VABIS 36 below it with 69 kW and the L50 S 4,2/4200 above it with 95 kW. 7586 Scania models across 18 series are on record. The model is listed under Trucks over 7.5 t. 8 verified figures from 1 source are on file.

Scania trucks 3.5–12 t (Class N2) – the collective page of medium-heavy Scania trucks from the classic L range to the modern P range, 88 to 309 kW, 4 to 8 cylinders, 3,810 to 11,620 kg unladen weight

This page gathers Scania vehicles of EU vehicle Class N2 – trucks with a gross weight between 3.5 and 12 tonnes, determined from registration data. In this weight class, Scania's line-up consists chiefly of older, smaller models of the L range (such as the L50, L3642, LB111) from the days of Scania-Vabis, which was formed in 1911 from the merger of the wagon maker Vabis with the car maker Scania and was renamed Scania in 1969, plus lighter chassis of the modern P range, which Scania has run since the PRT range logic (P, G, R, T) introduced in 1995 as the lowest-cab variant for distribution traffic. The letter-number combinations of the older L and LB models denote historically grown chassis and engine variants whose exact key can no longer be reliably reconstructed from the type designations alone.

Read on 3 more paragraphs

The register lists here 79 versions with engine outputs from 88 to 309 kW (recorded for 7 models), displacements from 5,190 to 14,200 cm³ across four to eight cylinders, unladen weights from 3,810 to 11,620 kg, gross weights from 5,150 to 12,000 kg, lengths from 5,060 to 10,450 mm and widths from 2,200 to 2,580 mm.

Vehicles of this weight class mainly serve urban and regional distribution traffic, as fire-service and municipal chassis, and, among the older L models, as historic commercial vehicles in the classic-vehicle scene.

On the classic L and LB models, frame condition and rust as well as parts availability through specialists count, on the P ranges mileage, the condition of clutch and gearbox, the braking system and, on younger model years, the exhaust aftertreatment; parts run through the Scania dealer network.

Sources: Kennwerte der Modelle Scania Lkw 3,5–12 t (Klasse N2), Scania (Hersteller)

Technical data

Engine

Power88 kWcorrect
Displacement5,200 cm³correct

Dimensions and weights

Length6,710 mmcorrect
Width2,370 mmcorrect
Unladen weight4,925 kgcorrect
Gross vehicle weight12,000 kgcorrect

Drivetrain and chassis

Gears8correct

Where this model stands

Power-to-weight ratio: 17.9 kW/t (88 kW / 4.9 t)

Stronger than 4% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Scania L 50 have?

The Scania L 50 delivers 88 kW.

How much does the Scania L 50 weigh?

The unladen weight is 4,925 kg.

What is the gross vehicle weight of the Scania L 50?

12,000 kg.

What engine does the Scania L 50 have?

5,200 cm³ displacement.

What are the dimensions of the Scania L 50?

6,710 mm × 2,370 mm.

When was the Scania L 50 built?

Production years: 1972.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare