Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Rhino › Other models › 182

Rhino 182

Series: Other models

The Rhino 182 is a machine built by Rhino. The engine delivers 18 hp (13 kW). The engine is water-cooled. The model was built in Yangcheng, Jiangsu, China. The fuel is diesel. Rated output across the Rhino range ranges from 16 to 65 hp; the 182 sits at the bottom of that range with 18 hp. Its immediate neighbours are the 162 below it with 16 hp and the 3120 above it with 20 hp. Rated output across the Rhino range ranges from 12 to 48 kW; here the 182 sits at the bottom of that range with 13 kW. 24 Rhino models across 2 series are on record.

Rhino International – other models: tractors from 20 to 6144 in four numeric groups, 12 to 48 kW, diesel engines throughout

This page gathers the Rhino International tractors the register could not assign to a named range. The type designations run from short two- and three-digit numbers such as 20, 162 or 654 to four-digit combinations such as 2134, 2224 or 6144. Several numeric groups are visible – 162 to 344, 404 to 654, and the four-digit 2100, 2200, 3100 and 6100 combinations – each with its own running numbering. The register itself does not allow any firm statement on origin or the exact manufacturer; only the type designations and power figures listed here are certain.

Read on 3 more paragraphs

The register lists here 21 versions with 12 to 48 kW (16 to 65 hp), all with diesel engines.

With a power span of 12 to 48 kW, the models covered fall into the class of smaller to medium multi-purpose tractors, of the kind used on smaller holdings, for grassland work and as a tow unit for light to medium implements; the four numeric groups each correspond to their own segment of this power span.

On tractors of this power class, what counts is the condition and hours of the diesel engine, the tightness of the hydraulic system, the condition of clutch and gearbox, and rust on the bodywork and chassis; a test drive checking all gears and the PTO is advisable before buying, along with checking which wearing parts can even be sourced with purpose without a firm manufacturer link.

Sources: SpecCodex register, model data: Rhino International, Zulassungsdaten (Register)

Technical data

Engine

Fueldieselcorrect
Power18 hp (13 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driverear-wheel driveWDcorrect

Origin and approval

PlantYangcheng, Jiangsu, Chinacorrect

Frequently asked questions

How much power does the Rhino 182 have?

The Rhino 182 delivers 18 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare