Renders TAN 3W
Built: 1993 · Series: TAN
More machines from model year 1993
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Renders TAN – two- to four-axle semi-trailers from the Netherlands: the TAN 2/3/4 range, unladen weight up to 11.2 t, gross weight up to 40 t, lengths up to 13.85 m
Renders also builds the TAN range in the Netherlands, covering semi-trailers with two to four axles: the digits 2, 3 and 4 in the designations TAN 2, TAN 3 and TAN 4 indicate the number of axles, while suffixes such as 2-1, 3W or 4-1L mark build and equipment variants of the same basic type. As with other Renders ranges, the chassis is designed for tipping and bulk-goods bodies.
Read on 3 more paragraphs
The register lists 9 versions with unladen weights from 5,300 to 11,240 kg at a gross weight of 18,000 to 40,000 kg. Lengths range from 8,880 to 13,850 mm, widths from 2,500 to 2,700 mm – the spread reflecting the range's differing axle counts.
With chassis from two to four axles, the TAN range covers a wide field of use, from more compact trailers for urban building sites to long, heavy tippers for long-haul transport of bulk goods, excavated earth or agricultural bulk cargo. Renders competes here with other Benelux makers of tipping and tandem-axle semi-trailers.
When buying used, the frame and axle suspension need particular attention on the higher-axle-count versions, along with the tipping ram or moving floor, air suspension, braking system with ABS/EBS, and the kingpin and landing gear. The condition of the sideboards and load floor and their resistance to moisture determine remaining service life; spare parts run through Dutch and Belgian commercial-vehicle dealers.
Sources: SpecCodex register, model data: Renders TAN, Zulassungsdaten RDW (Niederlande)
Technical data
Dimensions and weights
| Length | 11,980 mmcorrect |
|---|---|
| Width | 2,700 mmcorrect |
| Unladen weight | 6,000 kgcorrect |
| Gross vehicle weight | 30,000 kgcorrect |
Frequently asked questions
How much does the Renders TAN 3W weigh?
The unladen weight is 6,000 kg.
What is the gross vehicle weight of the Renders TAN 3W?
30,000 kg.
What are the dimensions of the Renders TAN 3W?
11,980 mm × 2,700 mm.
When was the Renders TAN 3W built?
Production years: 1993.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.