Reform 2000
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Reform Werke Reform 2000 is a tractor from Reform Werke.
At 12 km/h, that is as fast as it goes. It measures 2.77 m in length, 2.25 m in width and 1.15 m in height. Empty, it weighs 670 kg.
Technical data
Engine
| Engine | Luftgekühlter Viertakt-Ottomotor2 Zylinder643 cm³16/19 PScorrect |
|---|
Dimensions and weights
| Length | 2,765 mmcorrect |
|---|---|
| Width | 2,250 mmcorrect |
| Height | 1,150 mmcorrect |
| Wheelbase | 1,775 mmcorrect |
| Unladen weight | 670 kgcorrect |
Drivetrain and chassis
| Top speed | 11.6 km/hcorrect |
|---|
Frequently asked questions
How much does the Reform Reform 2000 weigh?
The unladen weight is 670 kg.
How fast does the Reform Reform 2000 go?
Top speed is 11.6 km/h.
What are the dimensions of the Reform Reform 2000?
2,765 mm × 2,250 mm × 1,150 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikipedia (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
