StartTractorsZil › Онежец-300

Zil Онежец-300

Series: Other models

The photo shows the Д-14 from the same series. Source: https://www.agrarheute.com/technik/traktor-fan-14-liebt-geru

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Зил Онежец-300 is a tractor from Зил. The engine is rated at 120 kW. The engine comes from Turbodiesel.

It measures 6 m in length, 2.49 m in width and 3 m in height. Empty, it weighs 11,600 kg.

Within the range, rated power spans from 5 to 820 kW; with 120 kW, the Онежец-300 sits in the mid-field. Directly alongside are the ТТ-4 with 110 kW below and the Т-140 with 140 kW above.

Technical data

Engine

EngineTurbodieselcorrect
Power120 (88.2)correct

Dimensions and weights

Length6,000correct
Width2,490correct
Height3,000correct
Unladen weight11,600correct

Where this model stands

Power-to-weight ratio: 10.3 kW/t (120 kW / 11.6 t)

Power class: Large (100–180 hp)

Stronger than 87% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much does the Zil Онежец-300 weigh?

The unladen weight is 11,600 kg.

What are the dimensions of the Zil Онежец-300?

6,000 mm × 2,490 mm × 3,000 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare