StartTractorsZil › ДТ-175

Zil ДТ-175

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Зил ДТ-175 is a tractor made by Зил. Engine output is 170 kW. vorne acted as the engine supplier.

The machine is 5.17 m long, 1.90 m wide and 2.90 m high. Unladen weight is 8,030 kg.

Within the range, rated power spans from 5 to 820 kW; with 170 kW, the ДТ-175 sits in the upper third. Directly alongside are the Т-170 with 160 kW below and the ЛП-19 with 240 kW above.

Technical data

Engine

Enginevornecorrect
Power170 (125)correct

Dimensions and weights

Length5,170correct
Width1,900correct
Height2,900correct
Unladen weight8,030correct

Where this model stands

Power-to-weight ratio: 21.2 kW/t (170 kW / 8 t)

Power class: Heavy (> 180 hp)

Stronger than 94% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much does the Zil ДТ-175 weigh?

The unladen weight is 8,030 kg.

What are the dimensions of the Zil ДТ-175?

5,170 mm × 1,900 mm × 2,900 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare