StartTractorsZil › Ярославец Я-250

Zil Ярославец Я-250

Series: Other models

The photo shows the Д-14 from the same series. Source: https://www.agrarheute.com/technik/traktor-fan-14-liebt-geru

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Зил Ярославец Я-250 is a tractor from Зил. It measures 6.50 m in length, 4.43 m in width and 3.17 m in height.

Technical data

Engine

Enginevornecorrect

Dimensions and weights

Length6,500correct
Width4,430correct
Height3,170correct
Unladen weight32.3correct

Frequently asked questions

How much does the Zil Ярославец Я-250 weigh?

The unladen weight is 32.3 kg.

What are the dimensions of the Zil Ярославец Я-250?

6,500 mm × 4,430 mm × 3,170 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare