StartHarvesting machineryPonsse › Ergo

Ponsse Ergo

Series: Ponsse Harvester

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ponsse Ergo belongs to the Ponsse Harvester series. The engine delivers 278.8 hp (205.1 kW). Torque is 1,100.1 Nm. The unladen weight is 16,000 kg. Top speed is 28 km/h. The tank holds 400.1 litres. Maximum torque is reached at 1,500 rpm. The hydraulic tank holds 350.2 litres. The electrical system runs on 24 V. The engine fitted is the OM906LA. The Ponsse Harvester series covers 3 models. Rated output within it ranges from 175.4 to 326.4 hp; the Ergo sits in the upper part of that range with 278.8 hp. Its immediate neighbours are the Beaver below it with 175.4 hp and the Bear above it with 326.4 hp. 32 Ponsse models across 3 series are on record. The model is listed under Harvesting machinery. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine modelOM906LAcorrect
Power278.8 hp (205.1 kW)correct
Torque1,100.1correct
Speed at max. torque1,500 rpmcorrect

Dimensions and weights

Width2,840.7correct
Unladen weight16,000 kgcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmission-mechanical gearbox powercorrect
Top speed28 km/hcorrect
System voltage24 Vcorrect

Working data

Hydraulic oil capacity350.2 lcorrect
Fuel tank capacity400.1 lcorrect

Other data

Height3,770.4correct

Where this model stands

Power-to-weight ratio: 12.8 kW/t (205 kW / 16 t)

Stronger than 76% of the harvesting machinery in the register — out of 284 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ponsse Ergo have?

The Ponsse Ergo delivers 279 hp.

How much does the Ponsse Ergo weigh?

The unladen weight is 16,000 kg.

How fast does the Ponsse Ergo go?

Top speed is 28 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare