StartHarvesting machineryPonsse › Beaver

Ponsse Beaver

Series: Ponsse Harvester

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Beaver, Ponsse offers a model from the Ponsse Harvester series. The engine delivers 175.4 hp (129 kW). Torque is 675.1 Nm. The unladen weight is 13,900 kg. Ground clearance is 640.1 mm. Top speed is 25.1 km/h. The tank holds 280.1 litres. Maximum torque is reached at 1,600 rpm. The hydraulic tank holds 200.2 litres. The electrical system runs on 24 V. The engine fitted is the OM904LA. The Ponsse Harvester series covers 3 models. Rated output within it ranges from 175.4 to 326.4 hp; the Beaver sits at the bottom of that range with 175.4 hp. Its immediate neighbours are the Ergo above it with 278.8 hp. 32 Ponsse models across 3 series are on record. The model is listed under Harvesting machinery. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine modelOM904LAcorrect
Power175.4 hp (129 kW)correct
Torque675.1correct
Speed at max. torque1,600 rpmcorrect

Dimensions and weights

Width2,840.7correct
Ground clearance640.1correct
Unladen weight13,900 kgcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmission-mechanical gearbox powercorrect
Top speed25.1 km/hcorrect
System voltage24 Vcorrect

Working data

Hydraulic oil capacity200.2 lcorrect
Fuel tank capacity280.1 lcorrect

Other data

Height3,752.1correct

Where this model stands

Power-to-weight ratio: 9.3 kW/t (129 kW / 13.9 t)

Stronger than 40% of the harvesting machinery in the register — out of 284 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ponsse Beaver have?

The Ponsse Beaver delivers 175 hp.

How much does the Ponsse Beaver weigh?

The unladen weight is 13,900 kg.

How fast does the Ponsse Beaver go?

Top speed is 25.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare