Technical register for agricultural, construction and commercial machinery · sourced data
StartVansPeugeot › 230C 2.0HDI 80KW

Peugeot 230C 2.0HDI 80KW

Built: 2002-2007 · Series: Expert

More machines from model year 2002

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Peugeot 230C 2.0HDI 80KW is a model in the Expert series. Production: 2002-2007. The engine has 4 cylinders, with a displacement of 1,997 cm³. The machine is 1,840 mm wide. The unladen weight is 1,380 kg. The wheelbase measures 2,820 mm. The gross vehicle weight is 2,330 kg. The machine runs on 4 wheels. The Expert series covers 65 models. Unladen weight within it ranges from 1,288 to 2,032 kg; the 230C 2.0HDI 80KW sits at the bottom of that range with 1,380 kg. Its immediate neighbours are the 230C 2.0HDI below it with 1,376 kg and the 1.9D above it with 1,420 kg. 1192 Peugeot models across 16 series are on record. The model is listed under Vans. 9 verified figures from 1 source are on file.

Peugeot Expert – the French compact van since 1995: L1 to L3 as length variants, H1/H2 as roof-height variants, HDi and BlueHDi diesel engines of 1.6 and 2.0 litres, 51 to 130 kW

The Peugeot Expert has been Peugeot's mid-size compact van since 1995 and was built at the joint Sevel Nord plant in northern France alongside the identical Citroën Jumpy and, until 2007, the Fiat Scudo. The first generation ran until 2007, the second until 2016 with a considerably expanded HDi diesel programme, and the third generation from 2016 uses the PSA EMP2 platform, shared since then with the new Citroën Jumpy and the Toyota Proace. The type logic orders the vehicle length with L1 to L3 and the roof height with H1/H2, while the HDi and BlueHDi designations mark successive generations of diesel technology with four-cylinders of 1.6 to 2.0 litres.

Read on 3 more paragraphs

The register lists here 83 versions with outputs from 51 to 130 kW, displacements from 1,560 to 2,184 cm³, throughout four-cylinder, unladen weights from 1,288 to 2,475 kg, gross weights from 1,825 to 3,230 kg, lengths from 4,440 to 5,350 mm and widths from 1,750 to 2,050 mm.

The Expert competes in the European tradesman's van segment with the Volkswagen Transporter, Ford Transit Custom and Renault Trafic, and through the PSA sister models Jumpy and (formerly) Scudo is closely related technically, which eases parts availability.

On the HDi and BlueHDi engines, the condition of the particulate filter and EGR valve, the timing belt changed at the prescribed interval, the clutch and dual-mass flywheel, rust at the wheel arches and sliding-door rails, and the suspension under persistently high loads all count; parts run through the PSA/Stellantis network.

Sources: Kennwerte der Modelle Peugeot Expert, Peugeot (Stellantis, Hersteller)

Technical data

Engine

Cylinders4correct
Displacement1,997 cm³correct

Dimensions and weights

Width1,840 mmcorrect
Wheelbase2,820 mmcorrect
Unladen weight1,380 kgcorrect
Gross vehicle weight2,330 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Peugeot 230C 2.0HDI 80KW weigh?

The unladen weight is 1,380 kg.

What is the gross vehicle weight of the Peugeot 230C 2.0HDI 80KW?

2,330 kg.

What engine does the Peugeot 230C 2.0HDI 80KW have?

4 cylinders, 1,997 cm³ displacement.

When was the Peugeot 230C 2.0HDI 80KW built?

Production years: 2002-2007.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare