StartTrucks over 7.5 tPeterbilt › Conventional 359

Peterbilt Conventional 359

Built: 1984-1984 · Series: 359

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Peterbilt Conventional 359 is a machine built by Peterbilt. Production: 1984. The engine delivers 313 kW, has 6 cylinders, with a displacement of 14,640 cm³. The machine is 9,100 mm long and 2,450 mm wide. The unladen weight is 8,100 kg. The gross vehicle weight is 21,400 kg. Rated output across the Peterbilt range ranges from 294 to 350 kW; the Conventional 359 sits in the lower part of that range with 313 kW. Its immediate neighbours are the 359 EXHD below it with 294 kW and the 359 CLASSIC(S19) above it with 317 kW. 69 Peterbilt models across 45 series are on record. The model is listed under Trucks over 7.5 t. 8 verified figures from 1 source are on file.

Technical data

Engine

Power313 kWcorrect
Cylinders6correct
Displacement14,640 cm³correct

Dimensions and weights

Length9,100 mmcorrect
Width2,450 mmcorrect
Unladen weight8,100 kgcorrect
Gross vehicle weight21,400 kgcorrect

Where this model stands

Power-to-weight ratio: 38.6 kW/t (313 kW / 8.1 t)

Stronger than 64% of the trucks over 7.5 t in the register — out of 27,776 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Peterbilt Conventional 359 have?

The Peterbilt Conventional 359 delivers 313 kW.

How much does the Peterbilt Conventional 359 weigh?

The unladen weight is 8,100 kg.

What is the gross vehicle weight of the Peterbilt Conventional 359?

21,400 kg.

What engine does the Peterbilt Conventional 359 have?

6 cylinders, 14,640 cm³ displacement.

What are the dimensions of the Peterbilt Conventional 359?

9,100 mm × 2,450 mm.

When was the Peterbilt Conventional 359 built?

Production years: 1984.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare