Palfinger Crayler CR 55
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Palfinger Crayler CR 55 is a forklift truck made by Palfinger Crayler. It is powered by a four-cylinder engine producing 47.7 kW. Rated power is reached at 2,800 rpm.
Top speed is 12 km/h. It carries 2,495 kg.
Within the range, rated power spans from 35 to 47.7 kW; with 47.7 kW, the CR 55 sits at the top. Below it ranks the CR 45 with 35 kW.
Technical data
Engine
| Engine make | 2,349correct |
|---|---|
| Power | 47.7 kWcorrect |
| Rated speed | 2,800 rpmcorrect |
| Cylinders | 4correct |
Drivetrain and chassis
| Top speed | 12.1 km/hcorrect |
|---|
Working data
| Lifting capacity | 2,494.8 kgcorrect |
|---|
Other data
| Front wheels | 2correct |
|---|---|
| Load centre | 609.6 mmcorrect |
| Rear wheels | 1correct |
Frequently asked questions
How much power does the Palfinger Crayler CR 55 have?
The Palfinger Crayler CR 55 delivers 47.7 kW.
What engine does the Palfinger Crayler CR 55 have?
4 cylinders.
How fast does the Palfinger Crayler CR 55 go?
Top speed is 12.1 km/h.
What is the load capacity of the Palfinger Crayler CR 55?
Load capacity is 2,495 kg at a 610 mm load centre.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.