Palfinger Crayler CR 45
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Palfinger Crayler CR 45 to CR 65 – other truck-mounted forklifts of the register: three- and four-cylinders, 35 to 47.7 kW, 2,041.2 to 2,948.4 kg lift capacity
This page gathers the Palfinger Crayler models the register could not assign to a named range – CR 45, CR 50, CR 50 Palreach, CR 55 and CR 65. Crayler is the truck-mounted forklift range of the Austrian crane and attachment maker Palfinger: a forklift carried on the rear of a lorry and used there for loading and unloading, instead of standing permanently on a customer's site. The number in the type code gives the lift-capacity class, Palreach marks the version with extended lift height. The range covers, from CR 45 to CR 65, the mid to upper lift-capacity class of the Crayler family, while smaller CR types lie outside this selection.
Read on 3 more paragraphs
The register lists here 5 versions with 35 to 47.7 kW from three- and four-cylinders and lift capacities from 2,041.2 to 2,948.4 kg at a rated speed of a consistent 2,800 rpm.
Truck-mounted forklifts such as the Crayler make lorry loads independent of stationary forklifts at the customer's site and are used chiefly in building-material, beverage and pallet distribution, where loading and unloading has to happen without the customer's own yard equipment. Palfinger fits the range, as with its loader cranes, with rugged hydraulics for the daily switch between driving and working.
On a used Crayler, the condition of mast and hydraulic cylinders, mounting and locking on the lorry rear, engine and starter and wear on forks and rollers count; parts run through the Palfinger network.
Sources: Kennwerte der Modelle Palfinger Crayler (weitere Modelle), Palfinger (Hersteller)
Technical data
Engine
| Power | 35 kWcorrect |
|---|---|
| Rated speed | 2,800 rpmcorrect |
| Cylinders | 3correct |
Drivetrain and chassis
| Top speed | 12.1 km/hcorrect |
|---|---|
| Turning radius | 1,780 mmcorrect |
Working data
| Lifting capacity | 2,041.2 kgcorrect |
|---|
Other data
| Front wheels | 2correct |
|---|---|
| Load centre | 609.6 mmcorrect |
| Rear wheels | 1correct |
Frequently asked questions
How much power does the Palfinger Crayler CR 45 have?
The Palfinger Crayler CR 45 delivers 35 kW.
What engine does the Palfinger Crayler CR 45 have?
3 cylinders.
How fast does the Palfinger Crayler CR 45 go?
Top speed is 12.1 km/h.
What is the load capacity of the Palfinger Crayler CR 45?
Load capacity is 2,041 kg at a 610 mm load centre.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.