Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Opel › Other models › F302Z

Opel F302Z

Built: 1961 · Series: Other models

More machines from model year 1961

Source: landwirt.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The F302Z comes from Opel. Production: 1961. The vehicle is 1,970 mm wide. The unladen weight is 3,180 kg. The wheelbase measures 3,000 mm. The vehicle runs on 4 wheels. Unladen weight across the Opel range ranges from 734 to 3,645 kg; the F302Z sits in the upper part of that range with 3,180 kg. Its immediate neighbours are the 71-66 below it with 3,140 kg and the F332 Z above it with 3,202 kg. 1437 Opel models across 23 series are on record.

Opel – other vans: the collective page outside the named ranges with the Arena, Blits, F302Z and Rekord-C, displacement 1,970 cm³, weight 1,070 to 3,180 kg

This page gathers the Opel vans the register could not assign to a named range: the Arena, the Blits, the F302Z and a panel van built on the Rekord-C. Opel is based in Rüsselsheim, Hesse; the types listed here range from van and flatbed bodies on passenger-car platforms to standalone light commercial vehicles.

Read on 3 more paragraphs

The register lists 4 versions here with a displacement of 1,970 cm³ from the four-cylinder engine, kerb weights from 1,070 to 3,180 kg, a length of 4,434 mm, widths from 1,750 to 2,000 mm and a height of 2,037 mm.

In their day these types covered light distribution and trade work, with body variants from the closed van to the open flatbed, competing on the European market with the Ford Transit and group siblings within the Stellantis group, such as Peugeot and Citroën. The alphanumeric type designations such as F302Z refer to internal factory development numbers, a practice used at Opel for decades, both on series-production vehicles and on conversions based on passenger-car models.

For a used example, check rust protection on sills, wheel arches and load floor, the condition of the clutch, brakes and suspension bushings, and the seal of the sliding doors and tailgate; parts for the older types are today mostly found through specialist dealers and parts markets for Opel classics.

Sources: SpecCodex register, model data: Opel (weitere Modelle), Opel (Stellantis)

Technical data

Dimensions and weights

Width1,970 mmcorrect
Wheelbase3,000 mmcorrect
Unladen weight3,180 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Opel F302Z weigh?

The unladen weight is 3,180 kg.

When was the Opel F302Z built?

Production years: 1961.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare