Noblelift FE3R16AC
Series: Noblelift Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a forklift truck, the Noblelift FE3R16AC belongs to the Noblelift Forklift series. Engine output is 5.1 kW.
At 12 km/h, that is as fast as it goes. In service, it weighs 2,850 kg. It carries 1,600 kg.
Within the range, rated power spans from 2.2 to 10.1 kW; with 5.1 kW, the FE3R16AC sits in the lower third. Directly alongside are the FE3R08AC with 2.2 kW below and the FE4F18 with 6.3 kW above.
Technical data
Engine
| Power | 5.1 kWcorrect |
|---|
Dimensions and weights
| Ground clearance | 90.2 mmcorrect |
|---|---|
| Unladen weight | 2,850 kgcorrect |
Drivetrain and chassis
| Tyre type | supereleastic 18x7-8/4.33Rcorrect |
|---|---|
| Top speed | 12.1 km/hcorrect |
Working data
| Lifting capacity | 1,600 kgcorrect |
|---|
Other data
| Front wheels | 2correct |
|---|---|
| Gabelspreizung mm | 1,000.3 mmcorrect |
| Kraftstoffart | electriccorrect |
| Lift speed | 30 m/mincorrect |
| Load centre | 500.1 mmcorrect |
| Mast tilt back | 6 Gradcorrect |
| Mast tilt forward | 3 Gradcorrect |
| Rear wheels | 1correct |
| Senkgeschwindigkeit mmin | 30 m/mincorrect |
Where this model stands
Power-to-weight ratio: 1.8 kW/t (5 kW / 2.9 t)
Stronger than 12% of the forklift trucks in the register — out of 323 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Noblelift FE3R16AC have?
The Noblelift FE3R16AC delivers 5.1 kW.
How much does the Noblelift FE3R16AC weigh?
The unladen weight is 2,850 kg.
How fast does the Noblelift FE3R16AC go?
Top speed is 12.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.