Noblelift CPC 17
Series: Noblelift Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | YD480G-9correct |
|---|---|
| Fuel | dieselcorrect |
Dimensions and weights
| Width | 1,112.5correct |
|---|---|
| Wheelbase | 1,350.3correct |
| Ground clearance | 105.2correct |
| Unladen weight | 2,650 kgcorrect |
Drivetrain and chassis
| Tyre type | front 7.00-9-10PR rear 5.00-8-8PRcorrect |
|---|---|
| Top speed | 17.4 km/hcorrect |
| Turning radius | 1,950 mmcorrect |
Working data
| Lifting capacity | 1,500 kgcorrect |
|---|---|
| Lift height | 3,000 mmcorrect |
Other data
| Lift speed | 24 m/mincorrect |
|---|---|
| Load centre | 500.1 mmcorrect |
| Mast tilt back | 12°correct |
| Mast tilt forward | 6°correct |
Frequently asked questions
How much does the Noblelift CPC 17 weigh?
The unladen weight is 2,650 kg.
How fast does the Noblelift CPC 17 go?
Top speed is 17.4 km/h.
What is the load capacity of the Noblelift CPC 17?
Load capacity is 1,500 kg at a 500 mm load centre, lift height 3,000 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.