StartTractorsNew Holland › TS100A CAB

New Holland TS100A CAB 2WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The New Holland TS100A CAB is a tractor from the New Holland 2WD Tractor series. Power comes from a four-cylinder engine; from 4.5 litres it draws 101 hp (74.6 kW). Rated speed is 2,200 rpm.

Unladen, it tips the scales at 4,540 kg.

Within the range, rated power spans from 25 to 157 hp; with 101 hp, the TS100A CAB sits in the mid-field. Directly alongside are the TL100A with 99.4 hp below and the T5060 with 106 hp above.

Technical data

Engine

Power101.4 hp (74.6 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement4,473.7 cm³correct
Aspirationturbochargedcorrect

Dimensions and weights

Unladen weight4,539.6 kgcorrect

Drivetrain and chassis

Gearbox typeSynchro Command w/ mechanical gearbox Shuttlecorrect
Forward gears12correct
Reverse gears12correct

Working data

Lifting capacity4,212 kgcorrect
Fuel tank capacity176.8 lcorrect
PTO output80 hpcorrect

Other data

Cab height2,962.7correct

Where this model stands

Power-to-weight ratio: 16.4 kW/t (75 kW / 4.5 t)

Power class: Large (100–180 hp)

Stronger than 68% of the tractors in the register — out of 15,143 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the New Holland TS100A CAB have?

The New Holland TS100A CAB delivers 101 hp.

How much does the New Holland TS100A CAB weigh?

The unladen weight is 4,540 kg.

What engine does the New Holland TS100A CAB have?

4 cylinders, 4,474 cm³ displacement.

What is the PTO output of the New Holland TS100A CAB?

PTO output is 80 hp.

How much does the rear linkage of the New Holland TS100A CAB lift?

The rear linkage lifts 4,212 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare