Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › New Holland › TM › TM 155

New Holland TM 155

Built: 2002-2008 · Series: TM

More machines from model year 2002

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The New Holland TM 155 is a model in the TM series. Production: 2002-2008. The engine delivers 155 hp (113 kW), has 6 cylinders, with a displacement of 7,480 cm³. Torque is 627 Nm. Rated speed is 2,200 rpm. The machine is 5,320 mm long, 2,550 mm wide and 2,975 mm high. The unladen weight is 6,470 kg. The wheelbase measures 2,723 mm. Top speed is 40 km/h. The tank holds 285 litres. Transmission: 18 V/6 R or 24 V/12 R. The gross vehicle weight is 10,000 kg. The linkage is category II/III. The PTO runs at 540/540E/1000 rpm. The TM series covers 18 models. Rated output within it ranges from 115 to 155 hp; the TM 155 sits at the top of that range with 155 hp. Its immediate neighbours are the TM 140 below it with 144 hp. Unladen weight within it ranges from 5,250 to 6,470 kg; here the TM 155 sits at the top of that range with 6,470 kg. 1448 New Holland models across 71 series are on record.

New Holland TM (1999–2007) – the six-cylinder from Basildon between TS and TG: TM115 to TM190, the number as hp class, RC for Range Command, SS for SuperSteer, 7.5 litre engine of the Genesis line, 85 to 168 kW

The TM range was New Holland's upper mid-range tractor in the first blue years: introduced in 1999 as successor to the 8x60 range, built in Basildon, England, and replaced by the T7000 range in 2007. The type logic: TM marks the range, the number the hp class – TM115 about 115 hp, TM150 150 hp, TM190 190 hp – RC stands for the Range Command semi-powershift, SS for the SuperSteer front axle with increased steering angle, 4WD for four-wheel drive. In 2002 the range was revised and re-graded from TM120 to TM190, with power boost for PTO and transport work, which explains the register span up to 168 kW. The engine in all versions is the six-cylinder of 7.5 litres from the Genesis line Ford New Holland had developed in the 1990s for the 70 series – the register values of 7,478 to 7,500 cm³ show the one engine family.

Read on 3 more paragraphs

The register lists 18 versions with 84.6 to 168 kW from the six-cylinder at 2,200 rpm, torque from 472 to 627 Nm, unladen weights from 5,250 to 8,900 kg, gross weights from 8,500 to 12,000 kg, lengths from 4,675 to 5,789 mm, widths from 2,150 to 2,550 mm and heights from 2,926 to 2,980 mm.

In Western Europe the TM was the tractor of contractors and large arable farms – six-cylinder smoothness, powershift and a cab regarded as one of the quietest of its time; the TM range sold in large numbers in Britain, France and Germany.

On used tractors, operating hours, the condition of engine and injection pump, Range Command clutches and electronics, SuperSteer axle (play and leaks), hydraulics and cab count; parts run through CNH.

Sources: SpecCodex register, model data: New Holland TM, New Holland Agriculture (manufacturer)

Technical data

Engine

Power155 hp (113 kW)correct
Rated speed2,200 rpmcorrect
Torque627 Nmcorrect
Cylinders6correct
Displacement7,480 cm³correct

Dimensions and weights

Length5,320 mmcorrect
Width2,550 mmcorrect
Height2,975 mmcorrect
Wheelbase2,723 mmcorrect
Unladen weight6,470 kgcorrect
Gross vehicle weight10,000 kgcorrect

Drivetrain and chassis

Gearbox18 V/6 R or 24 V/12 Rcorrect
Top speed40 km/hcorrect

Working data

Fuel tank capacity285 lcorrect

Other data

Linkage categoryCat II/IIIcorrect
PTO speed540/540E/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 17.5 kW/t (113 kW / 6.5 t)

Power class: Large (100–180 hp)

Stronger than 84% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the New Holland TM 155 have?

The New Holland TM 155 delivers 155 hp.

How much does the New Holland TM 155 weigh?

The unladen weight is 6,470 kg.

What is the gross vehicle weight of the New Holland TM 155?

10,000 kg.

What engine does the New Holland TM 155 have?

6 cylinders, 7,480 cm³ displacement.

How fast does the New Holland TM 155 go?

Top speed is 40 km/h.

What are the dimensions of the New Holland TM 155?

5,320 mm × 2,550 mm × 2,975 mm.

When was the New Holland TM 155 built?

Production years: 2002-2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare