New Holland CX8090
Series: New Holland Combine
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The New Holland CX8090 sits at the top of New Holland's Elevation straw-walker range. Like its smaller sister model it separates grain and straw on walkers and offers the Elevation cleaning system with Opti-Fan; SmartTrax rubber tracks are available for this size too. The machine is meant for large farms and contractors who must harvest a lot of grain per day.
The difference lies mainly under the hood: the FPT Cursor 10 has 10,300.9 cm³ displacement, 6 cylinders and a turbocharger, and supplies the power for the higher throughput. Rated speed is 2,100 rpm and the drive is hydrostatic.
In length and tank volume the CX8090 shares the figures of its sister model: 9,052.6 mm in length and a 1,003.1 l tank. Comparing the displacement of the two engines shows the step up in power.
New Holland combines TR, TX, CX and CR – from the world's first rotary combine (TR70, 1975) to the Twin Rotor CR: TR from New Holland, Pennsylvania, TX and CX as straw-walker machines from Zedelgem, CR as twin rotor
New Holland's combines stand for two designs and two plants: the TR70 of 1975 was the world's first combine with rotors instead of threshing drum and straw walkers – two longitudinal rotors, the Twin Rotor, developed at the home plant in New Holland, Pennsylvania – and the TR range (TR85, TR86, TR89, TR95, TR96, TR99) carried that principle on in North America until 2002, with Ford engines and the Caterpillar 3208 V8 in the big models. The TX range (TX36, TX66, TX68) is the European straw-walker machine from the Zedelgem plant in Belgium, the former Claeys works that has belonged to New Holland since 1964; the CX range replaced it in 2001, CX8070 to CX8090 being the big six-walker machines of the 2000s. The CR range (CR940 to CR980, then CR9040 to CR9090) brought the Twin Rotor to Zedelgem and Europe in 2002 – with the Iveco Cursor 9 to Cursor 13 engines; the register span of 7.5 to 12.9 litres and 6 to 8 cylinders shows the engine breadth from the Ford six-cylinders to the Cat V8.
Read on 3 more paragraphs
The register lists 18 versions with engines of 7,500 to 12,897 cm³ at rated speeds of 2,100 to 2,630 rpm and lengths from 3,079 to 9,531 mm.
The Twin Rotor is New Holland's distinguishing feature against Claas (hybrid) and John Deere (single rotor); the CR9090 held the world record in 2008 for the quantity of wheat harvested in eight hours.
On used combines, threshing and engine hours, the condition of rotors, concave and sieves, header and feeder house, elevators and grain tank, engine and hydrostat and parts supply through CNH are what count.
Sources: SpecCodex register, model data: New Holland Mähdrescher, New Holland Agriculture (manufacturer)
Technical data
Engine
| Rated speed | 2,100 rpmcorrect |
|---|---|
| Cylinders | 6correct |
| Displacement | 10,300.9 cm³correct |
| Aspiration | turbochargedcorrect |
Dimensions and weights
| Length | 9,052.6 mmcorrect |
|---|
Drivetrain and chassis
| Gearbox type | hydrostatic transmission drivecorrect |
|---|
Working data
| Fuel tank capacity | 1,003.1 lcorrect |
|---|
Frequently asked questions
What engine does the New Holland CX8090 have?
6 cylinders, 10,301 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 5 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Latvian open data portal (retrieved August 2026) · RitchieSpecs equipment specifications (retrieved October 2026) · lectura-specs.com (retrieved August 2026) · media.cnh.com (retrieved October 2026) · How we check the data
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.
