Mowag W200
Built: 1974-1976 · Series: Other models
More machines from model year 1974
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mowag – other models: the collective page of the Swiss off-road vehicles from Kreuzlingen outside the named ranges, the W 200, W 300 and W 300 A, six- and eight-cylinders of 4,916 to 5,900 cm³
This page gathers the Mowag vehicles the register could not assign to a named range – the 4x4 off-road truck, W 300, W 300 A and W200. Mowag, based in Kreuzlingen on Lake Constance, has built military and government off-road vehicles since the 1950s; the W ranges denote light four-wheel-drive trucks for military and civil-defence use, part of the company's programme alongside its better-known wheeled armoured vehicles.
Read on 4 more paragraphs
The register lists here 4 versions from six- to eight-cylinders of 4,916 to 5,900 cm³, unladen weights from 2,910 to 3,380 kg, gross weights from 3,500 to 4,500 kg, lengths from 5,800 to 5,880 mm and widths from 2,000 to 2,220 mm.
Light Mowag off-road trucks of this kind handled transport and logistics tasks in the field for the Swiss army and other users; Mowag has belonged to the defence group General Dynamics since 2003 and now operates as General Dynamics European Land Systems-Mowag.
On these off-road vehicles, the condition of the four-wheel drive, transfer case and differential locks, the engine and clutch, the frame and axles, and corrosion of the cab and load bed all count; parts for the older W ranges usually run through military-vehicle specialists.
With gross vehicle weights from 3,500 to 4,500 kg, these vehicles fall into EU class N2 (3.5 to 12 t); as military off-road vehicles in army service, however, they were not subject to the civilian rules on tachographs, driving and rest times or tolls that apply to commercial trucks of this weight class. Characteristic of this design is the combination of four-wheel drive, a transfer case with a low-range gear, and differential locks, needed for difficult terrain.
Technical data
Engine
| Cylinders | 8correct |
|---|---|
| Displacement | 5,213 cm³correct |
Dimensions and weights
| Length | 5,880 mmcorrect |
|---|---|
| Width | 2,050 mmcorrect |
| Wheelbase | 3,300 mmcorrect |
| Unladen weight | 2,960 kgcorrect |
| Gross vehicle weight | 4,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Mowag W200 weigh?
The unladen weight is 2,960 kg.
What is the gross vehicle weight of the Mowag W200?
4,500 kg.
What engine does the Mowag W200 have?
8 cylinders, 5,213 cm³ displacement.
What are the dimensions of the Mowag W200?
5,880 mm × 2,050 mm.
When was the Mowag W200 built?
Production years: 1974-1976.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.