Mono Transservi TD-FA0160
Built: 2006 · Series: Other models
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
TD-FA0160 – EU class O3 trailer with a 10,000 kg gross weight at the upper limit of the class, 4,700 kg kerb weight and 5,300 kg payload
With a gross weight of 10,000 kg, the TD-FA0160 sits right at the upper limit of EU trailer class O3, the bracket between 3,500 and 10,000 kg. Trailers at this limit are usually already fitted with air brakes, as required from the heavier class O4 upward, marking the transition to heavy trailers.
Read on 3 more paragraphs
At a kerb weight of 4,700 kg, the payload comes to 5,300 kg, just over half of the gross weight. The body length of 11,550 mm and width of 2,600 mm describe a long build at a comparatively moderate gross weight, pointing to voluminous rather than especially dense cargo, such as lighter general goods or components needing more space.
Driving a combination at this weight limit requires at least a category CE licence. The combination of a long body and moderate gross weight allows a lower axle load per metre of vehicle length than on shorter, heavier trailers, which is easier on tyres and running gear as long as the load is spread evenly along the length.
When buying used, given this body length, checking the frame for sagging along its full length deserves attention, especially if the load was often spread unevenly over the area. The brake system should be checked for correct operation regardless of its exact type, and the lighting installation along the vehicle's full length deserves a thorough visual check because of vibration loading.
Sources: SpecCodex-Register: Kennwerte des Modells TD-FA0160
Technical data
Dimensions and weights
| Length | 11,550 mmcorrect |
|---|---|
| Width | 2,600 mmcorrect |
| Unladen weight | 4,700 kgcorrect |
| Gross vehicle weight | 10,000 kgcorrect |
Frequently asked questions
How much does the Mono Transservi TD-FA0160 weigh?
The unladen weight is 4,700 kg.
What is the gross vehicle weight of the Mono Transservi TD-FA0160?
10,000 kg.
What are the dimensions of the Mono Transservi TD-FA0160?
11,550 mm × 2,600 mm.
When was the Mono Transservi TD-FA0160 built?
Production years: 2006.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
