Meusburger MCT-2
Built: 2000-2003 · Series: Other models
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Meusburger – other models: Austrian low-loader and modular semi-trailers of the MTS/MPA/MPG series, gross weights from 18,000 to 79,000 kg
Meusburger Fahrzeugbau is an Austrian manufacturer of heavy low-loader and modular semi-trailers; this collective page gathers models outside the named series. The MTS, MPA, MPG and MIL codes denote different build types — low-loader semi-trailers, platform trailers, gooseneck versions and intermediate dollies — with the trailing figure usually giving the axle count, such as MTS-4 for four axles or MPG-6 for six.
Read on 3 more paragraphs
The register lists 61 versions with kerb weights from 2,700 to 46,690 kg and gross weights from 18,000 to 79,000 kg. Widths sit between 2,520 and 3,000 mm; some models also carry recorded lengths up to around 18,290 mm, typical of extendable low-loaders for long components.
Meusburger supplies European heavy-haulage and abnormal-load transport with semi-trailers for construction machinery, steel components and wind-power parts. The fine gradation by axle count allows axle-load distribution to be matched to the specific cargo, as required by official abnormal-load permits.
When buying used, check the frame and main beams for cracks, particularly around the sliding mechanisms of extendable models. The height-adjustment hydraulics, brake system, axle units and kingpin condition should be inspected, along with capacity plates and abnormal-load permits. Spare parts for axles and hydraulic components are supplied by the manufacturer itself and by specialist heavy-haulage workshops.
Technical data
Dimensions and weights
| Length | 9,150 mmcorrect |
|---|---|
| Width | 2,520 mmcorrect |
| Wheelbase | 1,400 mmcorrect |
| Unladen weight | 2,700 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Meusburger MCT-2 weigh?
The unladen weight is 2,700 kg.
What is the gross vehicle weight of the Meusburger MCT-2?
18,000 kg.
Up to what speed is the Meusburger MCT-2 approved?
Approved up to 100 km/h.
What are the dimensions of the Meusburger MCT-2?
9,150 mm × 2,520 mm.
When was the Meusburger MCT-2 built?
Production years: 2000-2003.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-
10919 MPG5
11234
11781 MPG-3
3-A-MEGA
ANHÄNGER
MCT2
MDY-1
MEUSBURGER
MEUSBURGER MPA-2
MEUSBURGER MPG 3
MEUSBURGER MPG-4
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.