Mestone VPV-5
Built: 2008-2015 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mestone VP-3: heavy O4-class EU trailer with a 30,000 kg gross weight, 4,980 kg unladen weight and 25,020 kg payload on a 10,100 mm length
The Mestone VP-3 falls into EU trailer category O4 with a gross weight of 30,000 kg, the heavy trailers and semi-trailers above 10 tonnes used in heavy-haul and construction logistics behind suitably approved tractor units.
Read on 3 more paragraphs
At 10,100 mm long and 2,500 mm wide, the vehicle weighs 4,980 kg unladen; up to the permitted gross weight of 30,000 kg, 25,020 kg of payload remains, more than four-fifths of the gross weight. That gives a payload share of around 83 percent of the gross weight.
Such a high payload share on a comparatively compact length points to dense, heavy cargo such as stone, metal or building materials rather than bulky, light loads. Towing one requires licence category CE, since the gross weight is far above 3.5 tonnes, and a dedicated compressed-air braking system is standard in this class. Under EU rules, O3 and O4 trailers must carry retroreflective contour markings at the rear and along the sides.
When buying a heavy trailer of this type used, check the braking system and its lines, the axle mounts for play, and the frame around the hitch. With a payload share of more than four-fifths, sustained overloading tends to show up first in the springs and axle stubs. After a test drive it is also worth checking that the wheel nuts are properly torqued and inspecting the tyre tread depth.
Sources: SpecCodex-Register: Kennwerte des Modells Mestone VP-3
Technical data
Dimensions and weights
| Length | 14,700 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 6,480 kgcorrect |
| Gross vehicle weight | 42,000 kgcorrect |
Frequently asked questions
How much does the Mestone VPV-5 weigh?
The unladen weight is 6,480 kg.
What is the gross vehicle weight of the Mestone VPV-5?
42,000 kg.
What are the dimensions of the Mestone VPV-5?
14,700 mm × 2,550 mm.
When was the Mestone VPV-5 built?
Production years: 2008-2015.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.