Start › Trailers › Mestone › VP-3

Mestone VP-3

Built: 2015-2015 · Series: Other models

More machines from model year 2015

Source: https://www.kleinanzeigen.de/s-anzeige/pkw-anhaenger-drehsch

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mestone VP-3 is a machine built by Mestone. Production: 2015. The machine is 10,100 mm long and 2,500 mm wide. The unladen weight is 4,980 kg. The gross vehicle weight is 30,000 kg. Unladen weight across the Mestone range ranges from 1,500 to 10,340 kg; the VP-3 sits in the lower part of that range with 4,980 kg. Its immediate neighbours are the PPV-3 below it with 3,762.5 kg and the PP-3 above it with 5,880 kg. 14 Mestone models are on record. The model is listed under Trailers. 5 verified figures from 1 source are on file.

Technical data

Dimensions and weights

Length10,100 mmcorrect
Width2,500 mmcorrect
Unladen weight4,980 kgcorrect
Gross vehicle weight30,000 kgcorrect

Frequently asked questions

How much does the Mestone VP-3 weigh?

The unladen weight is 4,980 kg.

What is the gross vehicle weight of the Mestone VP-3?

30,000 kg.

What are the dimensions of the Mestone VP-3?

10,100 mm × 2,500 mm.

When was the Mestone VP-3 built?

Production years: 2015.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

D-2

D1

KA-3

MESTONE

PP-3

PPV-3

PVP-3

UPPV-3

VP-4

VP-5

VPV-3

VPV-4

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare