Meiller TR3
Built: 2008-2008 · Series: Other models
Technical data
Dimensions and weights
| Length | 10,150 mmcorrect |
|---|---|
| Width | 2,520 mmcorrect |
| Wheelbase | 7,200 mmcorrect |
| Unladen weight | 7,870 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Meiller TR3 weigh?
The unladen weight is 7,870 kg.
What is the gross vehicle weight of the Meiller TR3?
39,000 kg.
Up to what speed is the Meiller TR3 approved?
Approved up to 100 km/h.
What are the dimensions of the Meiller TR3?
10,150 mm × 2,520 mm.
When was the Meiller TR3 built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
DMC
F.X.MEILLER MZDA 18/20
G 18ZB 5.0
HKM
MA 18 ZL 5.4
MEILLER MHKS 41/3
MG 18 ZL 5.0
MHKA 12/27 NOSS2
MHKS41/2-G
MHVA 18/36 NOSS2
MZDA 18/2
MZDA 18/21
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.