McCormick CT32 HST 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The McCormick CT32 HST is a tractor from the McCormick 4WD Tractor series. Power comes from a four-cylinder engine; from 1.6 litres it draws 32 hp (23.9 kW). Rated output is reached at 2,600 rpm, so it works in the lower rev range.
Top speed is 27 km/h. Unladen weight is 1,200 kg.
Within the range, rated power spans from 28.4 to 194 hp; with 32.4 hp, the CT32 HST sits at the bottom end. Directly alongside are the CT28HST with 28.4 hp below and the CT36 with 39 hp above.
Technical data
Engine
| Power | 32.4 hp (23.9 kW)correct |
|---|---|
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 1,648.5 cm³correct |
Dimensions and weights
| Ground clearance | 330.2correct |
|---|---|
| Unladen weight | 1,200 kgcorrect |
Drivetrain and chassis
| Gearbox type | HST +3rangecorrect |
|---|---|
| Forward gears | 12correct |
| Reverse gears | 12correct |
| Top speed | 26.6 km/hcorrect |
| System voltage | 12 Vcorrect |
Working data
| Pump flow | 30.3 l/mincorrect |
|---|---|
| Fuel tank capacity | 32.2 lcorrect |
Other data
| Height | 2,316.5correct |
|---|
Where this model stands
Power-to-weight ratio: 19.9 kW/t (24 kW / 1.2 t)
Power class: Compact (< 40 hp)
Stronger than 20% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the McCormick CT32 HST have?
The McCormick CT32 HST delivers 32.4 hp.
How much does the McCormick CT32 HST weigh?
The unladen weight is 1,200 kg.
What engine does the McCormick CT32 HST have?
4 cylinders, 1,648 cm³ displacement.
How fast does the McCormick CT32 HST go?
Top speed is 26.6 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.