Mattro Production Ziesel
Built: 2017-2021 · Series: Other models
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mattro Production, other models: the Ziesel (2017-2021) with 6.6 kW output, an unladen weight of 387.5 kg and a permissible gross weight of 600 kg
The Ziesel belongs to the class of small tracked vehicles built for steep or hard-to-reach terrain, as found in vineyards, orchards or hillside forestry. Compact vehicles of this kind take on transport tasks there for which a conventional wheeled tractor would be too heavy, too wide or insufficiently capable off-road.
Read on 3 more paragraphs
With an unladen weight of 387.5 kg, a permissible gross weight of 600 kg, a length of 1,200 mm and a width of 1,200 mm, the Ziesel ranks among the lightest machines in its market segment. Its 6.6 kW drive output is matched to the vehicle's low mass and its purpose as a small carrier rather than a machine pulling tillage implements.
Such a compact, light tracked vehicle is designed for climbing ability and ground-pressure distribution on slopes rather than for road speed or pulling power for heavy implements. Its near-square footprint of 1,200 mm in both length and width allows a tight turning radius between vine or tree rows, where a classic tractor could not turn.
When buying such a small tracked vehicle, the condition of the rubber tracks or undercarriage, the tightness of the drive unit and the function of the steering deserve particular attention, since slope work stresses components more than level ground. The load bed and its mounting points should also be checked for wear and corrosion.
Sources: SpecCodex-Register: Kennwerte des Modells Ziesel
Technical data
Engine
| Power | 6.6 kWcorrect |
|---|
Dimensions and weights
| Length | 1,200 mmcorrect |
|---|---|
| Width | 1,200 mmcorrect |
| Unladen weight | 387.5 kgcorrect |
| Gross vehicle weight | 600 kgcorrect |
Where this model stands
Power-to-weight ratio: 17 kW/t (7 kW / 0.4 t)
Power class: Compact (< 40 hp)
Stronger than 1% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Mattro Production Ziesel have?
The Mattro Production Ziesel delivers 6.6 kW.
How much does the Mattro Production Ziesel weigh?
The unladen weight is 388 kg.
What is the gross vehicle weight of the Mattro Production Ziesel?
600 kg.
What are the dimensions of the Mattro Production Ziesel?
1,200 mm × 1,200 mm.
When was the Mattro Production Ziesel built?
Production years: 2017-2021.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
