Technical register for agricultural, construction and commercial machinery · sourced data
StartHarvesting machineryMassey Ferguson › 9435 Self-Propelled

Massey Ferguson 9435 Self-Propelled

Series: Massey Ferguson Swather

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Massey Ferguson Swather series from Massey Ferguson includes the 9435 Self-Propelled. The engine with a displacement of 4,408.1 cm³. Top speed is 24.1 km/h. The tank holds 302.8 litres. The gearbox has 2 forward gears. There are also 2 reverse gears. The engine fitted is the 4,4 CTA. 1491 Massey Ferguson models across 50 series are on record. The model is listed under Harvesting machinery. 8 verified figures from 1 source are on file.

Massey Ferguson Swather – self-propelled windrowers from the AGCO brand Massey Ferguson, from the 9220 to the 9635, Cummins engines of 3,294 to 6,604 cm³ for forage harvesting

This page gathers the self-propelled windrowers of Massey Ferguson, the agricultural machinery brand of the AGCO group. The type designations 9220, 9225, 9430, 9435 and 9635 form an ascending numbering by size class and engine power, with the Self-Propelled suffix distinguishing the self-propelled version from a pull-type mower. The machines are powered by Cummins engines of the B and C ranges, including the B3.3T, 4.4 CTA and 6.6 CTA types.

Read on 3 more paragraphs

The register lists here 5 versions with engines from 3,294 to 6,604 cm³ and a build width of around 3,725 mm.

Self-propelled windrowers such as the MF 9000 range cut grass or forage and lay it in swaths to wilt before it is turned into silage or hay. They are used chiefly in grassland farming and by contractors, where high area output counts during the short forage harvesting season.

When buying used, the cutterbars and conditioners should be checked for wear on knives and tines, along with the condition of drive belts and clutches, which are heavily stressed while mowing. The engine and hydraulic system should be checked for documented servicing, as should the tyres for even wear. Spare parts for the Cummins engines are available through Cummins service, and for cutterbar and conditioner through the AGCO dealer network.

Sources: Kennwerte der Modelle Massey Ferguson Swather, Massey Ferguson (AGCO, Hersteller)

Technical data

Engine

Engine model4.4 CTAcorrect
Displacement4,408.1 cm³correct

Drivetrain and chassis

Gearbox typehydrostatic transmissioncorrect
Forward gears2correct
Reverse gears2correct
Top speed24.1 km/hcorrect

Working data

Fuel tank capacity302.8 lcorrect

Other data

Cab height3,358.9correct

Frequently asked questions

What engine does the Massey Ferguson 9435 Self-Propelled have?

4,408 cm³ displacement.

How fast does the Massey Ferguson 9435 Self-Propelled go?

Top speed is 24.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare