Limetec VPU 218
Built: 2011-2013 · Series: VPU
More machines from model year 2011
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Limetec VPU – semi-trailer range: nine versions with kerb weight 2,800 to 12,720 kg, gross weight 18,000 to 48,000 kg, length up to 17,482 mm
Limetec markets the VPU range, a line of semi-trailers of varying size. Model names from VPU 216 to VPU 648 span compact to very long versions, as shown by the model designation VPU 220 /566+182 with its stated combined length.
Read on 3 more paragraphs
The register lists 9 versions with kerb weights from 2,800 to 12,720 kg and gross vehicle weights from 18,000 to 48,000 kg. Lengths run from 10,000 to 17,482 mm and widths from 2,545 to 2,600 mm.
With lengths of more than 17 metres, the longest versions of the VPU range are extendable or multi-part semi-trailers used for long, unit-load cargo such as building materials or components, while the shorter, lighter models cover general-cargo transport. In this field, Limetec competes with other European manufacturers of specialist semi-trailers, such as Nooteboom and Faymonville.
When buying used, the frame and axle mountings should be checked for corrosion, cracks and wear, along with the brakes, air suspension and kingpin. On the long, extendable versions, the extension guides and locks as well as frame torsional stiffness are additional points to check; given the range's size variation, checking the load-bed length against the actual body is also worthwhile, along with wear on the extension rails themselves. Spare parts are stocked by the general European commercial-vehicle trade.
Sources: Kennwerte der Modelle Limetec VPU
Technical data
Dimensions and weights
| Length | 10,000 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,150 mmcorrect |
| Unladen weight | 5,705 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Limetec VPU 218 weigh?
The unladen weight is 5,705 kg.
What is the gross vehicle weight of the Limetec VPU 218?
18,000 kg.
Up to what speed is the Limetec VPU 218 approved?
Approved up to 100 km/h.
What are the dimensions of the Limetec VPU 218?
10,000 mm × 2,550 mm.
When was the Limetec VPU 218 built?
Production years: 2011-2013.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.