Lift King RT60
Series: Lift King Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Lift King RT60 is a forklift truck from the Lift King Forklift series. The engine is rated at 61.1 kW.
At 29 km/h, that is as fast as it goes. Capacity is 2,722 kg.
Within the range, rated power spans from 61.1 to 119 kW; with 61.1 kW, the RT60 sits at the bottom end. The next one up is the LK12M22 with 64.1 kW.
Technical data
Engine
| Engine make | 2,351correct |
|---|---|
| Engine model | 1004C-44correct |
| Power | 61.1 kWcorrect |
Dimensions and weights
| Ground clearance | 292.1 mmcorrect |
|---|
Drivetrain and chassis
| Tyre type | drive 15.5x25 steer 14x17.5correct |
|---|---|
| Top speed | 29 km/hcorrect |
Working data
| Lifting capacity | 2,721.6 kgcorrect |
|---|
Other data
| Front wheels | 2correct |
|---|---|
| Kraftstoffart | dieselcorrect |
| Lift speed | 27.7 m/mincorrect |
| Load centre | 609.6 mmcorrect |
| Mast tilt back | 10 Gradcorrect |
| Rear wheels | 2correct |
Frequently asked questions
How much power does the Lift King RT60 have?
The Lift King RT60 delivers 61.1 kW.
How fast does the Lift King RT60 go?
Top speed is 29 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.