Start › Mining equipment › Liebherr › PR734 LGP

Liebherr PR734 LGP Crawler

Series: Other models

Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Liebherr PR734 LGP is a model in the Liebherr Crawler Tractor series. The engine delivers 202.8 hp (146.9 kW), has 6 cylinders, with a displacement of 9,996.1 cm³. Rated speed is 1,800 rpm. The unladen weight is 22,582 kg. Ground clearance is 502.9 mm. The tank holds 400.1 litres. The gearbox has 3 forward gears. There are also 2 reverse gears. The pump delivers 209.3 l/min. Working pressure is 199.9 bar. The cooling system holds 43.2 litres. The oil fill is 22.3 litres. The electrical system runs on 24 V. The engine fitted is the D 926 TI-E. The Liebherr Crawler Tractor series covers 25 models. Rated output within it ranges from 133.8 to 688 hp; the PR734 LGP sits at the bottom of that range with 202.8 hp. Its immediate neighbours are the PR726 LITRONIC below it with 190.4 hp and the PR736 LGP above it with 204 hp. 480 Liebherr models across 20 series are on record. The model is listed under Mining equipment. 19 verified figures from 1 source are on file.

Technical data

Engine

Engine modelD 926 TI-Ecorrect
Power202.8 hp (146.9 kW)correct
Rated speed1,800 rpmcorrect
Cylinders6correct
Displacement9,996.1 cm³correct
AspirationDirect injection turbo-chargedcorrect
Coolant capacity43.2 lcorrect
Engine oil capacity22.3 lcorrect

Dimensions and weights

Ground clearance502.9correct
Unladen weight22,582 kgcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmission travel drive and controlcorrect
Forward gears3correct
Reverse gears2correct
System voltage24 Vcorrect

Working data

Pump flow209.3 l/mincorrect
Hydraulic pressure199.9correct
Fuel tank capacity400.1 lcorrect

Other data

Height3,267.5correct

Where this model stands

Power-to-weight ratio: 6.5 kW/t (147 kW / 22.6 t)

Stronger than 55% of the mining equipment in the register — out of 945 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Liebherr PR734 LGP have?

The Liebherr PR734 LGP delivers 203 hp.

How much does the Liebherr PR734 LGP weigh?

The unladen weight is 22,582 kg.

What engine does the Liebherr PR734 LGP have?

6 cylinders, 9,996 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

LR632B L

Crawler

PR712B

Crawler

PR716 LITRONIC

Crawler

PR722B L

Crawler

PR724 L

Crawler

PR724 LGP

Crawler

PR724 XL

Crawler

PR726 LITRONIC

Crawler

PR732B

Crawler

PR734 L

Crawler

PR734 XL

Crawler

PR736 LGP

Crawler

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare