StartMining equipmentLiebherr › PR716 LITRONIC

Liebherr PR716 LITRONIC Crawler

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The PR716 LITRONIC from Liebherr is part of the Liebherr Crawler Tractor series. The engine delivers 145.5 hp (93.1 kW), with a displacement of 4,501.5 cm³. Rated speed is 2,100 rpm. The unladen weight is 15,200 kg. Ground clearance is 445 mm. The tank holds 320.2 litres. The pump delivers 97.3 l/min. The cooling system holds 24.2 litres. The oil fill is 19.3 litres. The electrical system runs on 24 V. The engine fitted is the EPA/CARB Tier 4f. The Liebherr Crawler Tractor series covers 25 models. Rated output within it ranges from 133.8 to 688 hp; the PR716 LITRONIC sits at the bottom of that range with 145.5 hp. Its immediate neighbours are the PR722B L below it with 133.8 hp and the PR724 L above it with 162.2 hp. 480 Liebherr models across 20 series are on record. The model is listed under Mining equipment. 15 verified figures from 1 source are on file.

Technical data

Engine

Engine modelEPA/CARB Tier 4fcorrect
Power145.5 hp (93.1 kW)correct
Rated speed2,100 rpmcorrect
Displacement4,501.5 cm³correct
AspirationTurbochangedcorrect
Coolant capacity24.2 lcorrect
Engine oil capacity19.3 lcorrect

Dimensions and weights

Ground clearance445correct
Unladen weight15,200 kgcorrect

Drivetrain and chassis

Gearbox typecontinuously variable transmission hydrostatic transmission travel drivecorrect
System voltage24 Vcorrect

Working data

Pump flow97.3 l/mincorrect
Fuel tank capacity320.2 lcorrect

Other data

Height3,014.5correct

Where this model stands

Power-to-weight ratio: 6.1 kW/t (93 kW / 15.2 t)

Stronger than 37% of the mining equipment in the register — out of 945 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Liebherr PR716 LITRONIC have?

The Liebherr PR716 LITRONIC delivers 146 hp.

How much does the Liebherr PR716 LITRONIC weigh?

The unladen weight is 15,200 kg.

What engine does the Liebherr PR716 LITRONIC have?

4,502 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare