Technical register for agricultural, construction and commercial machinery · sourced data

Liebherr LTC 1045-3.1

Built: 2011-2014 · Series: Other models

More machines from model year 2011

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the LTC 1045-3.1, Liebherr offers a model from the Weitere Modelle series. Production: 2011-2014. The engine delivers 240 kW, has 6 cylinders, with a displacement of 7,201 cm³. The machine is 10,410 mm long and 2,550 mm wide. The unladen weight is 35,750 kg. The wheelbase measures 4,070 mm. Top speed is 80 km/h. The gross vehicle weight is 36,000 kg. The machine runs on 6 wheels. The Weitere Modelle series covers 15 models. Rated output within it ranges from 232 to 440 kW; the LTC 1045-3.1 sits at the bottom of that range with 240 kW. Its immediate neighbours are the LG 1150 below it with 232 kW and the LG 1750 above it with 440 kW. Unladen weight within it ranges from 35,750 to 95,750 kg; here the LTC 1045-3.1 sits at the bottom of that range with 35,750 kg. 518 Liebherr models across 45 series are on record.

Liebherr LG and LTC – lattice boom mobile cranes and compact cranes from Ehingen

This page brings together the Liebherr mobile cranes that belong to neither the LTM nor the MK series: the lattice boom mobile cranes of the LG series and the telescopic compact cranes of the LTC series. As with the LTM cranes, the type designation follows a code: the 1 is followed by the maximum load capacity in tonnes – the LG 1750 is rated for 750 t, the LTC 1050-3.1 for 50 t. On the LTC cranes the digit after the hyphen gives the number of axles and the digit after the point the generation.

Read on 3 more paragraphs

The register lists eight visible versions here: LG 1150, LG 1550, LG 1750 and LG 1800-1.0 as well as LTC 1045-3.1, LTC 1050-3.1, LTC 1050-3.1E and LTC 1055-3.1. Unladen weights range from 35,750 kg for the LTC cranes to 95,750 kg for the LG 1750, and the recorded engine outputs from 232 to 440 kW.

Lattice boom mobile cranes are used where telescopic cranes reach their limits of capacity or hook height, for example on large industrial and wind turbine installations. The LTC compact cranes are built for confined sites; besides its combustion engine the LTC 1050-3.1E has a 72 kW electric motor that lets it run crane operations on site power without exhaust emissions.

On a used crane, what counts are the operating hours of carrier and superstructure, the crane's inspection history, the condition of boom, ropes and winches, and whether ballast and accessories are complete.

Sources: SpecCodex register, model data: Liebherr LG und LTC, Liebherr LTC-Kompaktkrane (manufacturer), Liebherr LTC 1050-3.1E (manufacturer)

Technical data

Engine

Power240 kWcorrect
Cylinders6correct
Displacement7,201 cm³correct

Dimensions and weights

Length10,410 mmcorrect
Width2,550 mmcorrect
Wheelbase4,070 mmcorrect
Unladen weight35,750 kgcorrect
Gross vehicle weight36,000 kgcorrect

Drivetrain and chassis

Wheels6correct
Top speed80 km/hcorrect

Where this model stands

Power-to-weight ratio: 6.7 kW/t (240 kW / 35.8 t)

Stronger than 53% of the mobile & rough terrain cranes in the register — out of 723 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Liebherr LTC 1045-3.1 have?

The Liebherr LTC 1045-3.1 delivers 240 kW.

How much does the Liebherr LTC 1045-3.1 weigh?

The unladen weight is 35,750 kg.

What is the gross vehicle weight of the Liebherr LTC 1045-3.1?

36,000 kg.

What engine does the Liebherr LTC 1045-3.1 have?

6 cylinders, 7,201 cm³ displacement.

How fast does the Liebherr LTC 1045-3.1 go?

Top speed is 80 km/h.

What are the dimensions of the Liebherr LTC 1045-3.1?

10,410 mm × 2,550 mm.

When was the Liebherr LTC 1045-3.1 built?

Production years: 2011-2014.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Mobile crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare