Lider Damper LT299
Built: 2019-2019 · Series: Other models
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lider Damper – other models: the collective page of tipper semi-trailers from the Turkish manufacturer outside the named ranges, LT101 and LT299, 6,120 to 7,000 kg unladen weight, 34,000 to 35,500 kg gross weight
This page gathers the tipper semi-trailers of the Turkish manufacturer Lider Damper the register could not assign to a named range – with only two versions this amounts to the whole programme listed here. The types LT101 and LT299 carry the maker's code LT followed by a running number. As with many smaller semi-trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 6,120 to 7,000 kg, gross weights from 34,000 to 35,500 kg, lengths from 10,490 to 13,700 mm and widths from 2,530 to 2,550 mm.
With gross weights of around 34 to 35.5 tonnes, these are heavy tipping semi-trailers for bulk and construction-material haulage, towed behind suitably rated tractor units in earthmoving, aggregate and construction-site transport. The length difference of over three metres between the two versions points to different body lengths or axle configurations.
On a used tipper semi-trailer, the condition and tightness of the tipping body, the function of the tipping ram and hydraulic pump, the condition of axles and the brake system, rust on frame and side rails, and the state of the side walls and locks all count in particular. Parts for axles, brakes and hydraulics at this vehicle class are usually available independently of the maker from commercial-vehicle suppliers. It is also worth testing the tipping mechanism under load before purchase.
Sources: SpecCodex register, model data: Lider Damper (weitere Modelle)
Technical data
Dimensions and weights
| Length | 10,490 mmcorrect |
|---|---|
| Width | 2,530 mmcorrect |
| Wheelbase | 8,140 mmcorrect |
| Unladen weight | 7,000 kgcorrect |
| Gross vehicle weight | 34,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Lider Damper LT299 weigh?
The unladen weight is 7,000 kg.
What is the gross vehicle weight of the Lider Damper LT299?
34,000 kg.
Up to what speed is the Lider Damper LT299 approved?
Approved up to 100 km/h.
What are the dimensions of the Lider Damper LT299?
10,490 mm × 2,530 mm.
When was the Lider Damper LT299 built?
Production years: 2019.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.