Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Landini › Powerfarm 105

Landini Powerfarm 105 4WD

Series: Powerfarm

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Landini Powerfarm 105 is a tractor from the Landini 4WD Tractor series. The engine draws 100 hp (73.5 kW) from 4.4 litres. Rated speed is 2,200 rpm.

Unladen weight is 3,443 kg.

Within the range, rated power spans from 36 to 217 hp; with 100 hp, the Powerfarm 105 sits in the mid-field. Directly alongside are the Rex 105 F with 99.9 hp below and the Landpower 125 TDI with 119 hp above.

Landini Powerfarm – the Fabbrico-built mid-range with Perkins 1103C/1104C-series diesel engines, 44 to 74 kW, PTO outputs 54 to 91 hp, models from Powerfarm 60 to Powerfarm DT 105

Landini builds its Powerfarm range at the Fabbrico plant in Emilia-Romagna, the marque's home site since its founding in 1884 and today part of the Italian Argo Tractors group. At Landini, Powerfarm occupies the mid power class between compact and large tractors; the digits after the name, as in Powerfarm 75 or Powerfarm 105, give roughly the output in hp, with DT marking four-wheel-drive versions. The models are powered by three-cylinder Perkins diesel engines of the 1103C and 1104C series.

Read on 3 more paragraphs

The register lists here 8 versions with 43.6 to 73.5 kW from engines of 3,293.8 to 4,399.9 cm³ displacement at a rated speed of 2,200 rpm and PTO outputs of 54 to 91 hp. Unladen weights range from 2,913.9 to 3,442.8 kg, lengths from 3,990 to 4,160 mm.

As a mid-range line, the Powerfarm targets mixed operations with field work, front-loader use and transport tasks, competing there with comparable ranges from New Holland, Case IH and Deutz-Fahr, above all in the Italian and southern European markets.

When buying a used Powerfarm, the condition of the Perkins engine (injection pump, turbocharger on the T versions), transmission and clutch, and corrosion on the cab and fenders rank among the key checkpoints; spare parts for engine and transmission run through the Landini and Perkins service networks.

Sources: Kennwerte der Modelle Landini Powerfarm, Landini (Hersteller)

Technical data

Engine

Engine model1104C-44Tcorrect
Power100 hp (73.5 kW)correct
Rated speed2,200 rpmcorrect
Displacement4,399.9 cm³correct

Dimensions and weights

Length4,160 mmcorrect
Ground clearance407.2correct
Unladen weight3,442.8 kgcorrect

Drivetrain and chassis

Gearbox typeSpeed Fourcorrect
Forward gears12correct
Reverse gears12correct
Tyre sizeFront 12.4-24, Rear 18.4-30correct
Turning radius3,510 mmcorrect

Working data

Pump flow81.8 l/mincorrect
Hydraulic pressure180correct
Fuel tank capacity103 lcorrect

Other data

Cab height2,490.2correct
PTO output91 hpcorrect

More machines with this engine (Perkins 1104C-44T, 80)

Where this model stands

Power-to-weight ratio: 21.3 kW/t (74 kW / 3.4 t)

Power class: Universal (40–100 hp)

Stronger than 66% of the tractors in the register — out of 15,659 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Landini Powerfarm 105 have?

The Landini Powerfarm 105 delivers 100 hp.

How much does the Landini Powerfarm 105 weigh?

The unladen weight is 3,443 kg.

What engine does the Landini Powerfarm 105 have?

4,400 cm³ displacement.

What is the PTO output of the Landini Powerfarm 105?

PTO output is 91 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare