Laatusäiliöt 1 AKS. DOLLY
Built: 1997 · Series: Other models
More machines from model year 1997
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Laatusäiliöt 1 Aks. Dolly – single-axle converter dolly, EU class O3, with 10,000 kg gross weight and 1,350 kg unladen weight.
A single-axle converter dolly is not a stand-alone trailer in the usual sense but a coupling unit: it carries a fifth wheel and a drawbar eye, turning a towed semi-trailer into a trailer that can be pulled behind a further articulated unit or lorry. This design is especially common in combinations running two or more trailers.
Read on 3 more paragraphs
The 1 Aks. Dolly – Finnish for single-axle dolly – carries a gross weight of 10,000 kg. Against an unladen weight of 1,350 kg that leaves a payload of 8,650 kg, transferred through the resting semi-trailer's kingpin load onto the single axle. Body length is 4,700 mm, width 2,600 mm, dimensions set by the coupling geometry rather than by any cargo of its own.
At 10,000 kg gross weight the dolly sits at the top of EU trailer class O3 and so carries an air brake system, controlled from the tractor unit. Driving the whole combination requires licence category CE, plus a correctly adjusted fifth wheel on the dolly itself and a secure drawbar link to the leading vehicle.
When buying a used dolly, check the fifth wheel for wear first, since it takes the largest share of the semi-trailer's resting load, along with the single axle and its bearings for play. The coupling to the leading unit and the air lines should be leak-free and free of chafing, and the drawbar eye should show no elongation from years of pulling and braking.
Sources: SpecCodex-Register: Kennwerte des Modells 1 Aks. Dolly
Technical data
Dimensions and weights
| Length | 4,700 mmcorrect |
|---|---|
| Width | 2,600 mmcorrect |
| Unladen weight | 1,350 kgcorrect |
| Gross vehicle weight | 10,000 kgcorrect |
Frequently asked questions
How much does the Laatusäiliöt 1 AKS. DOLLY weigh?
The unladen weight is 1,350 kg.
What is the gross vehicle weight of the Laatusäiliöt 1 AKS. DOLLY?
10,000 kg.
What are the dimensions of the Laatusäiliöt 1 AKS. DOLLY?
4,700 mm × 2,600 mm.
When was the Laatusäiliöt 1 AKS. DOLLY built?
Production years: 1997.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
