Technical register for agricultural, construction and commercial machinery · sourced data
StartMini excavatorsKubota › KX033-4HGAX

Kubota KX033-4HGAX

Series: Kubota Mini Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kubota KX033-4HGAX belongs to the Kubota Mini Excavator series. The engine delivers 25.1 hp (17.3 kW), with a displacement of 1,646.9 cm³. The engine comes from Kubota. Rated speed is 2,200 rpm. The unladen weight is 3,454.6 kg. Ground clearance is 292.6 mm. The tank holds 46.9 litres. The fuel is diesel. The pump delivers 61.3 l/min. The hydraulic tank holds 44.7 litres. The engine fitted is the D1703M-DI-E4. The Kubota Mini Excavator series covers 51 models. Rated output within it ranges from 7.8 to 67.5 hp; the KX033-4HGAX sits in the lower part of that range with 25.1 hp. Its immediate neighbours are the KX71-3HGLS below it with 24.7 hp and the KX91-3GLS2 above it with 30 hp. 1026 Kubota models across 33 series are on record. The model is listed under Excavators & compaction. 12 verified figures from 1 source are on file.

Kubota Mini Excavators: the U and KX Series Split on Tail Swing

Kubota splits its mini excavators into two families: the KX-series with conventional tail swing (the rear overhangs the tracks when the upper structure rotates) and the U-series with tight to zero tail swing (the rear stays within the track width). The "Kubota Mini Excavator" bucket holds 51 models spanning 5 to 46 kW, from the tiny K008-3 up to larger U- and KX-series machines.

Read on 3 more paragraphs

The U-series is built for working right against walls, fences or buildings, since the machine doesn't hit anything as it rotates — examples include the U15, U25, U27 and U35. The KX-series (e.g. KX41-3, KX91-3) trades that for the stability of conventional tail swing on open jobsites.

The digit after the hyphen marks the emissions generation: Kubota has revised its engine families several times, from E2 (Tier 2) through E3/E3B (Tier 3) to E4 (Tier 4 Final) and E5 (EU Stage V) — parts aren't necessarily interchangeable across generations.

When buying used, check the generation alongside cylinder count (3 or 4, depending on class) and the condition of the undercarriage and hydraulic cylinders — a common wear point especially on the compact K- and U-series machines.

Sources: Kennwerte der Modelle Kubota Mini Excavator, – U-Series | Kubota USA, – Meet the U17-5, – Kubota | Tier 4 Emissions – Clean Diesel Technology

Technical data

Engine

Engine makeKubotacorrect
Engine modelD1703M-DI-E4correct
Fueldieselcorrect
Power25.1 hp (17.3 kW)correct
Rated speed2,200 rpmcorrect
Displacement1,646.9 cm³correct

Dimensions and weights

Ground clearance292.6correct
Unladen weight3,454.6 kgcorrect

Working data

Pump flow61.3 l/mincorrect
Hydraulic oil capacity44.7 lcorrect
Fuel tank capacity46.9 lcorrect

More machines with this engine (Kubota D1703M-DI-E4, 11)

Where this model stands

Power-to-weight ratio: 5 kW/t (17 kW / 3.5 t)

Stronger than 45% of the mini excavators in the register — out of 400 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota KX033-4HGAX have?

The Kubota KX033-4HGAX delivers 25.1 hp.

How much does the Kubota KX033-4HGAX weigh?

The unladen weight is 3,455 kg.

What engine does the Kubota KX033-4HGAX have?

1,647 cm³ displacement, Diesel.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Mini excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare